Water in headlight, Water in headlight |
Water in headlight, Water in headlight |
Jan 12, 2013 - 1:48 PM |
|
Enthusiast Joined Feb 14, '09 From Mid West Currently Offline Reputation: 7 (100%) |
So we had a lil bit of rain. My passenger side hi-beam is 1/2 full of water!!..
Removing bumper is NOT going to happen!! SO-- Can I drill a small hole for it to empty out then smear silicone over it to seal it, then peel it off if //when it happens again?.. I CAN use just the lows but it was great having hi's out on the country roads we drive to & from work making it way easier to see road verman & deer.. Yup I did a search & wish it were only condensation, but I am definitely NOT pulling the bumper cover!! I don't have the time to have it layed up again when I break stuff pulling it off!!!! !!!ALWAYS HAPPENS TO BE MY LUCK!!!.. |
Jan 12, 2013 - 9:02 PM |
|
Enthusiast Joined Jan 20, '09 From Winnipeg Currently Offline Reputation: 5 (100%) |
It won't work.
Well, it will drain it but there will always still be that little bit of condensation in there, and it may mess up the shrouds within the headlight. Did this when i had the usuall condensation buildup in my headlight and yea it worked, but since it was in there for so long all the rusty brown was still in there, so I ended up just buying a new headlight. -------------------- -Protection mode, For when your amp tries to blow its load. 1995 Toyota Celica GTS - Daily Driver 1999 Chevy Cavalier - Winter Beater 1994 Honda Civic CX Hatchback - Dead My Celica! |
Lo-Fi Version | Time is now: November 23rd, 2024 - 1:45 PM |