6G Celicas Forums

Welcome Guest ( Log In | Register )

> Water in headlight, Water in headlight
post Jan 12, 2013 - 1:48 PM
+Quote Post
Bigblock

Enthusiast
***
Joined Feb 14, '09
From Mid West
Currently Offline

Reputation: 7 (100%)




So we had a lil bit of rain. My passenger side hi-beam is 1/2 full of water!!.. rolleyes.gif
Removing bumper is NOT going to happen!!
SO--
Can I drill a small hole for it to empty out then smear silicone over it to seal it, then peel it off if //when it happens again?.. kindasad.gif
I CAN use just the lows but it was great having hi's out on the country roads we drive to & from work making it way easier to see road verman & deer.. smile.gif
Yup I did a search & wish it were only condensation, but I am definitely NOT pulling the bumper cover!! I don't have the time to have it layed up again when I break stuff pulling it off!!!!
!!!ALWAYS HAPPENS TO BE MY LUCK!!!.. mad.gif
 
Start new topic
Replies
post Jan 17, 2013 - 4:39 AM
+Quote Post
aiq

Enthusiast

Joined Dec 24, '12
Currently Offline

Reputation: 0 (0%)




I bought my 96 celica with water in the drive side high beam head light. The bulb was busted out and the bulb harness was not plugged back into the headlight assemble and that is how water had gotten in. I don't know how long the car sat like that because the water had turned yellow and rusty. My entire headlight is yellow from inside. I just heated up an old pointy screwdriver and drilled a hole in it from the bottom. All the water drained out and haven't had the water problem again aside from the headlight looking ugly.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 23rd, 2024 - 4:45 PM