 Oil and temp gauges, install questions |
 Apr 26, 2004 - 2:33 PM
|
 
|
 Enthusiast  Joined Feb 19, '04 From austin tx Currently Offline Reputation: 1 (100%)  |
I have an oil pressure gauge, and a water tempurature gauge, both mechanical, and i was wondering exactly how you install them. For the oil pressure, from what i read and searched, i find the sending unit, and use a t-fitting off of it. Where exactly is this? ive read that it is near the exhaust manifold (5SFE) but im not sure exactly. Also, where do i run the water temp sensor to?
Thanks -mike Edit: another Q, with the oil pressure line, it says to slide the hex nut on the nylon tubing, then a ferrule, and then tighten the nut onto the engine fitting... it seems like the tubing would want to just slide out (especially if it is under pressure) will tightening down the nut keep the tubing secure to the fitting? This post has been edited by mikew04: Apr 26, 2004 - 4:52 PM --------------------  |
Posts in this topic
mikew04 Oil and temp gauges Apr 26, 2004 - 2:33 PM
zipstrips the water trmp sensor and get installed in some wa... Apr 26, 2004 - 9:42 PM mikew04 Where is the oil sending unit located on the 5s? ... Apr 27, 2004 - 9:30 AM mikew04 Anyone? Apr 28, 2004 - 1:04 PM toyotaspeed_90 i'd have to look for it to find it... but on a... Apr 28, 2004 - 2:28 PM mikew04 Is the sensor going to be an electric plug?
thats ... Apr 28, 2004 - 6:39 PM zipstrips QUOTE (mikew04 @ Apr 28, 2004 - 4:39 PM) Is the se... Apr 28, 2004 - 10:44 PM madmods mike, thats correct as far as how to connect that ... Apr 29, 2004 - 1:08 AM
mikew04 Thanks for the info
What does the oil sending unit... Apr 29, 2004 - 4:52 PM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 4th, 2024 - 5:27 PM |