 wire harness problem |
 Sep 7, 2004 - 6:23 PM
|
 
|
 Enthusiast  Joined May 23, '04 From Meridian, MS Currently Offline Reputation: 2 (100%)  |
ok i emailed elprototypes and they said
Hello: Based upon our experience, this is not a simple job. Testing, splicing and configuring for the application is about 30 hours. This assumes both harnesses are in original undamaged condition. Note: We solder all joints and match all wire gauges to avoid the risk of damage to the vehicle. The flat rate for this service is $1,500. The hourly rate is $65. / hour for damaged harnesses or repair of modified harnesses. By now you may be experiencing "sticker" shock; however, we would like to assure you that the cost is real, as is the time to do it properly. (We do a lot of repairs to harnesses that have been improperly modified and the total cost is invariably higher for the customer.) Regards, ELP is there not anyone who an do it cheaper, and i though someone told me ^they did their harness for $300 -------------------- |
Posts in this topic
celicaracer18 wire harness problem Sep 7, 2004 - 6:23 PM
Coomer Mike(Qatar) used to do harnesses for people, but l... Sep 7, 2004 - 6:31 PM lagos QUOTE (celicaracer18 @ Sep 7, 2004 - 4:23 PM) (We ... Sep 7, 2004 - 7:11 PM celicaracer18 ok thanks for the help guys, i actually just conta... Sep 7, 2004 - 8:03 PM Ryu3x16 i got mines done at el prototype for 700 bucks... ... Sep 7, 2004 - 8:53 PM DustyBurns30 wow, that is a shock to hear about qatar's wor... Sep 7, 2004 - 9:04 PM Digndoug Hey Lagos has any one started the how to on this??... Sep 7, 2004 - 9:14 PM
DG_Performance QUOTE(Digndoug @ Sep 7, 2004 - 7:14 PM)Hey La... Oct 26, 2005 - 6:19 PM Consynx i think mike had lost interest or possibly gotten ... Sep 7, 2004 - 11:17 PM sphinx a lot of people talk smack about Mike. BUT, you ha... Sep 8, 2004 - 1:34 AM 97sccelica i never really looked to far into wiring for any s... Sep 8, 2004 - 2:05 AM lagos 97sccelica,
putting the ecu in the engine bay wou... Sep 8, 2004 - 7:47 AM Supersprynt QUOTE (lagos @ Sep 8, 2004 - 8:47 AM) 97sccelica,
... Sep 8, 2004 - 7:50 AM Coomer QUOTE (Supersprynt @ Sep 8, 2004 - 5:50 AM) In rea... Sep 8, 2004 - 10:50 AM lagos QUOTE (Coomer @ Sep 8, 2004 - 8:50 AM) So is the f... Sep 8, 2004 - 11:04 AM Coomer QUOTE (lagos @ Sep 8, 2004 - 9:04 AM) besides that... Sep 8, 2004 - 11:16 AM Supersprynt I have a diagram from Mike, although its not 100% ... Sep 8, 2004 - 11:51 AM celicaracer18 well does all of this apply to a MR2 3sgte and ecu... Sep 8, 2004 - 1:08 PM Digndoug Talkign about all this with the 3s-gte, would you ... Sep 8, 2004 - 2:08 PM Ryu3x16 QUOTE (sphinx @ Sep 7, 2004 - 11:34 PM) a lot... Sep 8, 2004 - 4:30 PM Coomer QUOTE (Ryu3x16 @ Sep 8, 2004 - 2:30 PM) yeah..i kn... Sep 8, 2004 - 4:45 PM Ryu3x16 i took it to elprototype and they wanted 1500 to g... Sep 8, 2004 - 4:55 PM Coomer That's cool...a shame that people have had to ... Sep 8, 2004 - 5:03 PM celicaracer18 QUOTE (Ryu3x16 @ Sep 8, 2004 - 9:55 PM) i took it ... Sep 8, 2004 - 8:49 PM Anub1s Man I would say screw it if I had to pay that much... Sep 8, 2004 - 8:56 PM Zifoid QUOTE (Supersprynt @ Sep 8, 2004 - 4:51 PM) I have... Sep 10, 2004 - 10:19 AM Coomer QUOTE (Zifoid @ Sep 10, 2004 - 8:19 AM) QUOTE (Sup... Sep 10, 2004 - 10:23 AM lagos dont forget an uncut harness and resistor packs... Sep 10, 2004 - 10:59 AM rsos1 So can someone post the information on how to conv... Sep 12, 2004 - 1:51 AM celicaracer18 Well... ^ Sep 13, 2004 - 1:11 PM WannabeGT4 LOL this is old but... No one ever answered rsos1... Oct 25, 2005 - 1:36 PM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 4:49 PM |