 Fuel Cut/Loss of power @ 0 lbs. |
 Nov 23, 2004 - 11:50 AM
|
 
|
 Enthusiast  Joined Aug 27, '04 From Orange County, CA Currently Offline Reputation: 0 (0%)  |
My VAC is between -19 & -21 at idle, but when I try to boost and it reaches 0 lbs, I lose power. My RPMs are normally around 2500-3000 when this happens. If I punch it (which I hardly ever do) I can get it above 0 lbs and boost fine.
The turbo has no shaft play, and was installed a couple of weeks ago. I'll be bringing it down to the shop today, but wanted to see if anyone here knew what it might be. Thanks. --------------------  |
Posts in this topic
erics1one Fuel Cut/Loss of power @ 0 lbs. Nov 23, 2004 - 11:50 AM
lagos my guess would be boost leak, or exhaust manifold ... Nov 23, 2004 - 12:07 PM nik how do you have mbc hooked up? Nov 23, 2004 - 12:12 PM thedevilmaycrie alomost the same prob i had ... cap off the VAC li... Nov 23, 2004 - 12:44 PM Supersprynt I dont think he has a 3sgte - atleast his profile ... Nov 23, 2004 - 12:52 PM erics1one I have the 5SFTE
The right side VAC line on the w... Nov 23, 2004 - 1:24 PM erics1one Not all vacuum lines were zipped tied.
Zipped ... Nov 24, 2004 - 11:03 PM lagos yeah, loose vac lines= boost leak. i noticed that... Nov 25, 2004 - 12:47 AM
erics1one It usually sits between -19 to -21.
I still get a... Nov 25, 2004 - 11:35 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 11th, 2025 - 4:54 PM |