6G Celicas Forums

Welcome Guest ( Log In | Register )

> chargecooler
post Jan 16, 2006 - 5:30 PM
+Quote Post
dan4

Enthusiast
*
Joined Apr 23, '05
From kent
Currently Offline

Reputation: 0 (0%)




right i have trawled for weeks now to find out how to get the st205 IC pump to run constantly. i know i could just put a live feed and earth to it and run it off a switch but its my understanding that its connected to the ecu and will therefore put the engine check light on. Someone please help me...!!!!!

oh and for a nice easy mod on the stock st205 chargecooler clean out with petrol or a very high quality de greaser and apply heat shielding to the underside and you will see charge temps drop dramatically.... i was seeing 50-55 deg centigrade at 1.1 bar of boost and a ambient temp of about 7degrees centigrade, i am now seeing 30-35 at the same boost pressure and same ambient temp and i am yet to finish the heat shielding properly. NOTE when you flush the chargecooler, if there was a fair amount of oil in there it will smoke heavily as the deposits gradually work their way out. biggrin.gif biggrin.gif biggrin.gif

Posts in this topic
- dan4   chargecooler   Jan 16, 2006 - 5:30 PM
- - lagos   http://celicatech.com/forums/showthread.php?t=1111...   Jan 16, 2006 - 5:42 PM
- - dan4   i dont think you understood fully.... i dont have ...   Jan 16, 2006 - 5:45 PM
- - Supersprynt   I have the pump running off my ignition switch - a...   Jan 16, 2006 - 5:53 PM
- - dan4   how do you stop the ecu error code 54 appearing?...   Jan 16, 2006 - 5:57 PM
- - dan4   how do you stop the ecu error code 54 appearing?...   Jan 16, 2006 - 5:57 PM
- - Supersprynt   I have an ST185 3s w/ST185RC intercooler so I dont...   Jan 16, 2006 - 9:20 PM
- - defgeph   you need to ground a pink wire on your ecu. Thats ...   Jan 16, 2006 - 9:24 PM
- - defgeph   link   Jan 16, 2006 - 9:33 PM
- - dan4   right i have the wiring diagram which shows three ...   Jan 17, 2006 - 12:14 PM
- - defgeph   I'm not sure what to ground on the 205. Maybe ...   Jan 17, 2006 - 1:18 PM
|- - WannabeGT4   QUOTE(defgeph @ Jan 17, 2006 - 12:18...   Jan 17, 2006 - 2:09 PM
- - WannabeGT4   Splice into the blue wire on the 26 pin ECU connec...   Jan 17, 2006 - 3:43 PM
- - dan4   this might help understand, i havent really had a ...   Jan 18, 2006 - 8:43 AM
- - WannabeGT4   I found this scan to be quite helpful as well: htt...   Jan 18, 2006 - 10:15 AM
- - dan4   back to the drawing board methinks. earth the blue...   Jan 22, 2006 - 10:13 AM
- - WannabeGT4   I was afraid of that. If you can measure the volta...   Jan 22, 2006 - 10:29 AM
- - dan4   same idea as i had although i ran out of light and...   Jan 22, 2006 - 10:34 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 30th, 2024 - 4:35 PM