 Help CV joint change issues? |
 Jan 27, 2006 - 4:47 PM
|
 
|
|
Enthusiast  Joined Jan 17, '06 From Wisconsin Currently Offline Reputation: 0 (0%)  |
Heeeelllllppppp!!!!!!, I am currently trying to change the outer boot on the passenger side drive axle or cv joint. The chilton manual says to remove the inboard boot and joint (Which I did) then remove the dynamic dampner, which I can't figure out how to get off for the life of me!! It is a metal cylinder with rubber inside it.
-Has anyone ever removed this dampner before... The toyota dealer didn't even know how to get it off!!!! -But he did tell me the outboard cv joint should pound off, so I don't have to remove the dampner.... *However I tried this on the other axle and it didn't want to pound off????? Any ideas on how to do this? Is there a clip on the other side holding it on that I can't see????? This is on a 94 2.2 liter 5 speed celica.... THanks BrandonA. |
Posts in this topic
bdog_v Help CV joint change issues? Jan 27, 2006 - 4:47 PM
rjbibeau usually it's the driver side which give everyo... Jan 27, 2006 - 5:03 PM bdog_v Actually I already have it out. my issue is with e... Jan 27, 2006 - 5:09 PM Rjb23 1st cut the old boot off with a razor blade or som... Jan 27, 2006 - 11:19 PM bdog_v Just to let you guys know the dynamic dampener is ... Jan 30, 2006 - 12:53 AM
soulshadow Actually the fastest way is to just buy another re... Feb 2, 2006 - 9:41 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 3rd, 2024 - 5:19 PM |