 Kinda need some help |
 Jun 19, 2006 - 1:13 PM
|
 
|
 Enthusiast  Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%)  |
Ok everyone. I was installing the last Tein S-Tech lowering sring and I rounded off the sway bar bolt. The actual inner piece that requires an allen key/wrench is the rounded off part. What are my options for fixing this? Anyone else have this problem? I'm kind of at a standstill until I come up with something and I'm fresh outta ideas.
 Any ideas? Any one? This post has been edited by dustin15brown: Jun 19, 2006 - 1:14 PM --------------------  |
Posts in this topic
dustin15brown Kinda need some help Jun 19, 2006 - 1:13 PM
scothaniel Drill away...
This happened on my AllTrac, had t... Jun 19, 2006 - 1:51 PM Clipsetuner I just found out a sure fire way to get these off,... Jun 19, 2006 - 2:31 PM C3L1CA I did the same thing to mine. You can drill them o... Jun 19, 2006 - 2:33 PM LewFX sometimes a 14mm deep socket with air impact will ... Jun 19, 2006 - 2:44 PM Bitter grind it out or drill it. same thing happened to ... Jun 19, 2006 - 3:36 PM LewFX electric doesnt have much power, i used a makita h... Jun 19, 2006 - 5:23 PM
Bitter QUOTE(LewFX @ Jun 19, 2006 - 5:23 PM... Jun 19, 2006 - 7:32 PM Digndoug I had to use a saw-zaw to cut mine off. I just mad... Jun 19, 2006 - 5:46 PM dustin15brown I have an impact gun... hooked up to our air compr... Jun 19, 2006 - 7:27 PM LewFX i just used a air impact gun with a 14mm deep sock... Jun 19, 2006 - 8:17 PM Clipsetuner I found this out from toyota perfomance first hand... Jun 19, 2006 - 9:05 PM Batman722 OK here is the PROVEN "JDM Guy" way of g... Jun 19, 2006 - 10:47 PM dustin15brown QUOTE(Batman722 @ Jun 19, 2006 - 11... Jun 19, 2006 - 11:00 PM Batman722 QUOTE(Batman722 @ Jun 19, 2006 - 11... Jun 22, 2006 - 8:42 AM dustin15brown QUOTE(Batman722 @ Jun 22, 2006 - 9:4... Jun 22, 2006 - 11:37 PM LewFX just buy 2 new ones and prepared to toss the old o... Jun 19, 2006 - 11:09 PM Batman722 sure, end links wear over time and there is a rubb... Jun 19, 2006 - 11:13 PM LewFX na na na na na na na na na na na batmannnn, sorry ... Jun 19, 2006 - 11:24 PM dustin15brown the "JDM Guy" way works 10x better.... I... Jun 21, 2006 - 6:05 PM presure2 QUOTE(dustin15brown @ Jun 21, 2006 - 7... Jun 22, 2006 - 8:01 AM Tech9ine I'm a suckeR! I just cut my sway bar end l... Jun 24, 2006 - 3:53 PM toyotacrazy Also you can use an impact gun and 14mm socket. L... Jun 24, 2006 - 4:00 PM Rayme I lost my temper, my metal saw took care of it lol... Jul 15, 2006 - 6:31 PM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2024 - 9:51 PM |