FS: 300+ WHP CELICA Options

[nik]

WELL RIGHT NOW BUYING A HOUSE IS MORE IMPORTANT THAN HAVING MY CAR SO

$13,000 OBO


dyno provine at 312whp and 306 torque @17 psi
on only 2 hours of tuning with more time on the dyno and a little more tuning im possitive she hit 350 to the ground on 92 pump gas
built by F2uning in CDA idaho http://www.f2uning.com/pages/1/index.htm


motor 7AGTE

4agze big port head
- stage 2 port and polish
- ferrea valves
- TRD springs and retainers
-CP pistons (8.5;1) 81.50mm
-Puater custom 4340 chromoly rods 20 mm pins
-Innovation turbo 475hp capable @ crank
-B series honda manifold cut and 4ag welded flange
-38mm wastegate
-Greddy RS bov
-greddy Profec B boost controller
-custom aluminum intercooler piping
-custom 3" downpipe
-32x8x3 intercooler
-greddy oil catch tank
-SDS standalone engine management
-hks cam gears both
-Crower camshafts (272 in. , 272 ex.)
-arp head bolt
-fully balanced rods, pistons, crank , flywheel, underdrive pulley
-oem flywheel
-ACT 6 puck clutch
-83lb/hr injectors
-walbro 255 lph intank fuel pump
-MSD digi 7 with blocks
- Phantom grip lsd with upgrade springs
-doggy cf panel



exterior

vis invader front bumper
nopi battle wing (no longer on car)
VIS zyclone CF hood
supra side skirts (just went to the shop to finish molding)
jdm rear extensions
jdm tail lights
vis CF hatch (not installed yet)
kyb gr2 struts with eibach springs
18" 8.0 motegi ff5 rims
falken 225/40/18 tires

for more pics check my profile