 Convertible top power to motor problem |
 Sep 29, 2006 - 10:43 PM
|
 
|
|
Enthusiast Joined Sep 29, '06 From Malibu, CA Currently Offline Reputation: 0 (0%)  |
Howdy folks,
I have a 1996 convertible. I just had the top motors rebuilt and was installing them back in today. After I installed them and tested them, I found out that one side (passenger side) motor isn't getting any power to it. I used a volt meter to check what voltage was going to the connectors. I checked the drivers side and got a nice 11.8 reading. I checked the problem side and I got no reading (.1). I got a chiltons to try to check the wiring diagram and of course it was completely useless since I guess the convertibles were modified outside the factory when they were made. Anyway, anyone have any suggestions on what I could do or check to solve my problem? Thanks in advance, Alex |
Posts in this topic
SoCalMMA Convertible top power to motor problem Sep 29, 2006 - 10:43 PM
SoCalMMA bump Oct 3, 2006 - 3:48 PM
SoCalMMA Just a little update...
I've followed the wi... Oct 4, 2006 - 8:32 PM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 3rd, 2024 - 3:47 PM |