fs:2nd gen 3sgte, complete long block assembly Options

[alltracshoak]

ok..after buyers flaking out on buying my wrecked st185, i took the motor out today.it's a complete longblock assembly including turbo charger,exhaust manifold,and intake manifold.i just barely took the old usdm head off the jdm block and installed the jdm head on.this is originally an jdm motor, i was pulled over and have my fmic on so i was sent to state smog(referee).i would not pass with the jdm head so i took my old usdm head on and got it to pass.as you can see,there's pictures of the cylinder walls,each and every piston.












here's compression test that was done awhile ago before i took out the engine.





im asking for 900 picked up..bought this engine from jdmsource.com from canada in december 05.drove it for less than a year..car was wreck in 8/06.less than 60k..drove it less than 8k.

i would like this picked up at the moment.no shipping yet

this will need new seals(cam seals,crank seals*rear and main*,waterpump,new hg, and other hoses that may need to be replace)

This post has been edited by alltracshoak: Jul 10, 2007 - 9:31 PM