 cooling problem..., really weird.. |
 Nov 18, 2007 - 11:22 PM
|
 
|
 Enthusiast  Joined Feb 28, '07 Currently Offline Reputation: 1 (100%)  |
ok today i found out a lot about my engine,the old 7afe had around 210,xxx on it and the cooling system failed and the engine got fried.The cause was a little piece of wood that was blocking a T on the overflow of the radiator,the T had the bottom going into the overflow,the left side going to the hose tot eh radiator and the right side was blocked with a piece of wood,now my dad took out the piece of wood the engine would over heated,but then we got the factory L part but the engine overheated again.Now this is a different radiator than the stock one.The engine runs perfectly fine with the lil piece of wood in it..WTF,any ideas?
 (valo ill take ur pic off if u want..) This post has been edited by CelicaST_CALI: Nov 18, 2007 - 11:23 PM -------------------- BANNED. for life, you moron.
|
Posts in this topic
CelicaST_CALI cooling problem... Nov 18, 2007 - 11:22 PM
CelicaST_CALI BUMP Nov 19, 2007 - 8:02 PM Bitter get a new radiator cap. Nov 19, 2007 - 9:54 PM CelicaST_CALI hmm u think thats wat it is? Nov 20, 2007 - 12:41 AM Valo666 u check your thermostat? changed your coolant? got... Nov 20, 2007 - 1:00 AM CelicaST_CALI ya the engine is running like a top right now with... Nov 20, 2007 - 8:27 PM Bitter from the arrows it looks like you're blocking ... Nov 20, 2007 - 11:05 PM CelicaST_CALI but when we put the L on it over heated... Nov 20, 2007 - 11:47 PM Bitter can you put up a more clear explanation or diagram... Nov 21, 2007 - 7:59 PM CelicaST_CALI RE: cooling problem... Nov 23, 2007 - 12:23 AM Bitter so the wood is plugging the line from the rad cap ... Nov 23, 2007 - 12:26 AM CelicaST_CALI ok thanks ill do that,but y do u think it is doing... Nov 23, 2007 - 3:39 AM Valo666 wait...thats the difference between overheating an... Nov 23, 2007 - 11:52 AM
CelicaST_CALI ok heating as in,the temp gauge goes up and the wa... Nov 23, 2007 - 1:22 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 1:34 AM |