Another noise issue, (Wheel Bearing & Motor Mount), Noise comming from passenger side front end of 95 GT |
Another noise issue, (Wheel Bearing & Motor Mount), Noise comming from passenger side front end of 95 GT |
Oct 15, 2008 - 6:54 PM |
|
Enthusiast Joined Feb 10, '06 From Knoxville, TN Currently Offline Reputation: 8 (100%) |
Hey everyone!! I have not been around much the past couple of months due to school, work, baby, etc !!!! I hope everyone has been doing ok.
Anyway, I have an issue with the front passenger side wheel well of my 1995 GT. Whats happening: Nearly everytime I turn to the left I hear a rubbing sound. Sometimes it happens when I am going straight after a left turn. The noise only comes during one spot of the tire rotation, every time the valve stem is at the 5 o’clock position. The noise does not really sound like metal on metal more like a rubber on metal sound. The car has new brakes, rotors, wheel bearings about 6 months ago. What I have done: Took the wheel off and nothing seemed out of place or lose. There were no signs of any wheel rubbing on the tire or inner fender. Switched the front & rear wheel and the noise continued. What think it may be: Tie rod end Sway bar bushing CV axle Doubt it but may be a stuck Caliper I only have Sunday afternoons to mess with my car so please help me diagnose this problem, any help would be greatly appreciated! Thanks 6gc!!! A grateful Etnrider This post has been edited by ETNRIDER: Oct 22, 2008 - 1:18 PM -------------------- |
Lo-Fi Version | Time is now: December 4th, 2024 - 1:19 AM |