Brand New 4AGE 20v Wiring Harnesses Options

[Dr_Tweak]

As some of you know we've been working on building 100% new wiring harnesses from scratch using all new OEM connectors, wire seals, terminals, and wire. Here are some pictures of a nearly complete 4AGE blacktop harness. This harness is what we consider to be a "bare bones" wiring harness meaning that you could use it install a 20v into basically any vehicle. We can even add in the relays, fuse holders, etc to make it completely self-contained. This particular harness was tailored to an AE86 GTS swap, for example the wires for connection to the chassis were located in the area needed, and the igniter and coil plugs have been relocated to work with a distributor relocation kit.

The price on these new harnesses has not been set in stone yet, but we should have those numbers figured out pretty soon. We charged only $350 for this particular one. If the customer had supplied us with their GTS harness we could have wired it up plug and play for an additional charge. I think that this will be an excellent option for people with engines that have no harness, or a cut/damaged harness, or simply want everything to be brand new.











Shielded cable is used for the 02 signal wire, knock sensor wire, and of course the distributor. The shielding is connected to ground, this absorbs electromagnetic interference of the low-volt signal wires.













Normally I would loom this up with all new looming and make it look almost like factory. Per the customer's request we left it unloomed.