 Oil Question |
 Oct 4, 2009 - 4:33 PM
|
 
|
|
Enthusiast  Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%)  |
I bought an oil drain bolt from Autozone and it came with a light blue rubber gasket. When I removed the original oil drain bolt, it was all metal and no gasket. Anyway, I completed the oil change and ran the car around the block. Oil level is good and there's no oil on or around the new oil drain bolt with the gasket. I should be all set right??
I did hand tighten the new bolt with gasket and gave it a 1/3" turn (a bit more than 1/4" because I figured the gasket would crush and seat a bit more than if it were just a metal bolt). This post has been edited by 6G96GT: Oct 4, 2009 - 4:34 PM |
Posts in this topic
6G96GT Oil Question Oct 4, 2009 - 4:33 PM
trdproven you shouldn't have any worries, sometimes cars... Oct 4, 2009 - 5:36 PM 6G96GT Alright, sounds good. Thanks! Oct 4, 2009 - 5:44 PM Bitter my 7afe never had a gasket and never leaks. who kn... Oct 4, 2009 - 10:22 PM
6G96GT Well, I checked my oil drain bolt gasket after dri... Oct 5, 2009 - 4:18 PM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 4th, 2024 - 6:19 PM |