 Result of lowering with fenders and wheels |
 May 15, 2010 - 6:34 AM
|
 
|
 Enthusiast  Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%)  |
Hey guys i need some help. Lowered my fronts another 2cm. Funny thing is the measurement from the front coilovers are exactly the same from the top to the knuckle. But when its on the ground my driver side sits lower, this was measured on a flat road. I cant understand why!
And from lowering in another inch in the fronts. IT RUBS EVERYWHERE I GO NOW. the offset for the fronts is sitting flush with the fender. Not sure where its rubbing cause the edge of the fender paint isnt chipping so its rubbing somewhere else. Oh let me rephrase it isnt rubbing but chirping and making contact with the tyre with a point on the fender or the black pastic covering inside the fender while making turns at 40km/h speeds. What can i do to solve this, roll my fenders? I like how my car sits. But i cant stand it, and will have to raise it back up a little tomorrow... This post has been edited by whatthe: May 15, 2010 - 6:39 AM -------------------- |
Posts in this topic
whatthe Result of lowering with fenders and wheels May 15, 2010 - 6:34 AM
SwissFerdi Roll your fenders or cut out the offending section... May 15, 2010 - 11:40 AM Harold_Fastwaker You can raise the car back up a 1/4 inch, probably... May 16, 2010 - 12:38 AM whatthe Okay raised the front back 1cm and sounds fine, bu... May 16, 2010 - 5:11 AM SwissFerdi I never considered this, but mayyyybe I'm rubb... May 16, 2010 - 2:06 PM richee3 Your car is definitely not too low. No car is ever... May 16, 2010 - 5:31 PM
CelicaST_CALI i agree haha ^^^ May 16, 2010 - 6:42 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 19th, 2025 - 11:37 PM |