 external wastegate adapter and supporting the turbo? |
 Oct 19, 2011 - 7:54 PM
|
 
|
 Enthusiast  Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%)  |
Since I'm redoing my exhaust and mounting the turbo. I'm considering ordering the external wastegate adapter that fits between the mani and the turbo. Doing this will drop the turbo a couple inches, and will make supporting the turbo more difficult since I will have to make my own bracket
Has anyone done this or have you just bought a turbo manifold that already had a wastegate attachment on it? btw, this is a Gen III 3sgte, and I'm running a FMIC instead of the TMIC. I would like to be able to remove the stock wastegate actuator and spin the turbo so it faces down instead of up making it easier to run the turbo piping to the I/C. It will look cleaner too. This post has been edited by match220: Oct 20, 2011 - 5:15 PM -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
Posts in this topic
match220 external wastegate adapter and supporting the turbo? Oct 19, 2011 - 7:54 PM
ST205WRC do some research there are plenty of walkthroughs ... Oct 21, 2011 - 9:30 AM Smaay YES, if you are going to get the adapter, get one ... Oct 21, 2011 - 9:58 AM presure2 QUOTE (match220 @ Oct 19, 2011 - 8:5... Oct 21, 2011 - 11:11 AM
match220 QUOTE (presure2 @ Oct 21, 2011 - 6:1... Oct 21, 2011 - 3:12 PM presure2 just make sure its properly designed, or it will f... Oct 21, 2011 - 4:13 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2024 - 2:40 PM |