6G Celicas Forums

Welcome Guest ( Log In | Register )

> No heat, bad thermostat? but the gauge is fine.
post Dec 20, 2011 - 6:10 PM
+Quote Post
czwalga

Enthusiast
****
Joined Sep 27, '10
From pittsburgh
Currently Offline

Reputation: 4 (100%)




Alright the Temp gauge moves to middle of the gauge after the car heats up. However I still have no or minimal heat.

I obviously though that the heater core is clogged. Nope, I was able to run a pretty good stream of water through it with really no resistance. The valve is working and is open.


The only thing I can think of is that the temp gauge is 'wrong', and the thermostat is stuck open. It's a 3sge, and I did a lot of wire/dash ripping, but I dont think that has anythin to do with it. Removed the AC core, but I built ducting from the blower after I relocated it. Air is blowing out of the vents. Its my understanding that all the air passes through the heater core to the front vents no matter what. The heat is controlled by the valve in the engine bay.


--------------------
-93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD
-10 F150

Always buying stock wheels... PM me if interested in selling.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 4th, 2024 - 8:39 PM