 drum to disc conversion using gt disc setup for st model. |
 Jan 10, 2012 - 1:17 PM
|
 
|
|
Enthusiast  Joined Aug 16, '11 From california Currently Offline Reputation: 0 (0%)  |
hey thanks for looking at my thread. so the problem im having today is a break line issue. For my st at200, the rear drum break line has only one line on each rear drum. i bought a conversion setup from a gt off someone on this site. i found out froma few ppl, that i need a second steel break line for both rear discs. so where would those to new steel lines go to? do they connect with the one break line, or do they connect to the master cylinder under the hood? i was looking at an st204 at the junk yeard and noticed one more extra pice of medel on its disc break set up. it hangs on the outside where you can see, to the left of the caliper. i think its called something plate. do i need that?
|
Posts in this topic
finalate drum to disc conversion using gt disc setup for st model. Jan 10, 2012 - 1:17 PM
Smaay um im only aware of a single brake line on the rea... Jan 15, 2012 - 8:45 PM
Galcobar The hydraulic hoses are largely the same between d... Jan 16, 2012 - 12:38 AM  |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 7:01 AM |