![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined May 13, '06 From Kaimuki, HI Currently Offline Reputation: 10 (100%) ![]() |
I've been calling around about the stock o2 sensor in the Gen III 3sgte. I can't get anyone to cross reference the numbers I pulled from the parts reference list, so it looks like it's not available on any other toyota's produced in the US unless it's under a different part number. Toyota uses the same flange-style o2 sensor on the 5sfe, and there is also the link below from ebay. I'm running an Autronic EMS in my celica, so I can connect any o2 sensor. The holes to bolt it in are elongated, anyone know if this one will work? Or if any of the universal bungs on ebay will work. Since it is cheap, my only concern is it warping from the heat. Since I have the autronic, I can run a 4 wire heated o2 sensor instead of the stock two wire one, so I would like to go with the bung option. Anyone know if it fits?
o2 sensor on ebay for 5sfe or something like this maybe bung adapter -------------------- -Jay
95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other 01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished 02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve |
![]() ![]() |
Lo-Fi Version | Time is now: February 18th, 2025 - 6:51 PM |