 2nd Gen 3sgte, Electrical ECU Problems |
 Apr 27, 2013 - 4:17 PM
|
 
|
|
Enthusiast  Joined Sep 16, '08 From Michigan Currently Offline Reputation: 0 (0%)  |
My celica has been throwing code 52, Knock Sensor, for a while now. When the code first came about I replaced the ATS knock sensor that was on it with another ATS knock sensor that I bought from ATS. Due to the code not going away I first checked the connection to see if it was connected properly, everything checked out fine. I had enough of it so I took the car to a real good electrician in my area. He said that the problem doesn't lie with the sensor, but with the ECU; it isn't reading it. He told me to find out what was used to program the ECU and then he could help me. This is what led me to question, is it really my ECU that is doing this and how can I figure out for sure where the problem?
This post has been edited by cibrit-: Apr 27, 2013 - 4:20 PM -------------------- |
Posts in this topic
cibrit- 2nd Gen 3sgte, Electrical ECU Problems Apr 27, 2013 - 4:17 PM
soulshadow Check your wiring, there is a grounding shield on ... Apr 27, 2013 - 7:49 PM bsamps4 have you checked to see if the engine is actually ... Apr 29, 2013 - 1:16 PM
lagos Open up the case on the ecu and check for any blow... Apr 29, 2013 - 1:58 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 25th, 2024 - 12:51 PM |