 brake question |
 Aug 19, 2013 - 12:45 PM
|
 
|
|
Enthusiast  Joined Jan 18, '07 From Bergen county NJ Currently Offline Reputation: 24 (100%)  |
Ok, so I thought my caliper was stuck because I have grinding in the rear driver side brake setup.. also there is excess rust I thought was due to brake dust. Now that I was thinking I thought I changed the caliper already I could be wrong. Yesterday, after a test drive I didn't feel any heat from that wheel wheel which makes me think maybe the grinding is from something else. All the brakes are noisy but I assume it's from sitting and rust building up. The brake pedal does need to be pushed pretty far down so I know bleeding the brakes is where to start but what else should I look for? Could it all be from lake of use and rust building up? I'm guessing a good cleaning and inspection of brakes along with bleeding is what I'll be looking into now but is there anything else to look for?
Also any does anyone recommend products to clean rust and to lubricate the brakes? -------------------- |
Posts in this topic
supershannon77 brake question Aug 19, 2013 - 12:45 PM
rjbibeau could be a collapsed brake hose. You will know if ... Aug 19, 2013 - 2:20 PM
cyberblader1130 I would check the rear wheel bearing for play, ble... Aug 20, 2013 - 10:49 PM  |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 11:21 AM |