please close Options

[fhalperformance]

I bought the car to replace my camry as its OBD1 and only has to pass safety inspection in NY. I spent 6 months looking for a decent 6th gen as I had always loved the look of them but I need a truck more then I need this car. Just looking to get what I got into it out of it. I will take more pictures tomorrow to put up.

Car has fat brakes all the way around, good tires, all the electronics work, and have taken care of all the issues except for the rear noise over bumps from the sway bar bushings being a little worn out.

Parts Replaced/work done:
Used front doors (stock ones had rot along the bottom, passenger side replacement door hasn't been put it on yet)
Used rear hatch (stock one had rot)
Used hood (stock one had what looked like horrible hail damage)
New Passenger front fender (not worth repairing)
Used 96+ front bumper (stock one was ripped at the bottom)
New front bumper mounting hardware
New passenger front turn signal bulb holder with pigtail (previous owner had aftermarket bulb holder/pigtail tapped in place lol)
New hood release cable (stock one was missing, previous owner had a coat hanger coming out by a headlight to pop it)
Used seats with celica printed on them (drivers side one had a hole in it)
New aftermarket stereo install kit (block of wood was holding radio in when I bought it lol)
A/C has been recharged (no leaks) and blows ice cold
Replaced both rear tires
New passenger rear wheel cylinder (bleeder broke off, other rear bleeder came loose)
New rear brake hardlines (previous owner had 4 compression fittings on each line)
New fuel return line (pinhole)

Parts I got for it that havent been installed yet:
New OEM rear sway bar bushings
Used rear disc brake conversion
Used replacement front upper radiator support
Black floor mats out of a 97 gt
Fog lights from a 97 gt
New rear ebrake cables for the rear disc conversion




This post has been edited by fhalperformance: Nov 12, 2013 - 7:09 PM