GB: ATTENTION 5SFE!! WebCams ANY grind! $490, 5 people ready with CASH and CAMS in hand Options

[ILoveMySilly97]

I'm doing a group buy for the webcamshaft Performance grinds for our engine. You can choose ANY grind you want as long as it's from the 5sfe. I contacted them and they said they can cut a deal with me. If I can get 3+ buyers there'll be a 25% discount. If I can get 10+ buyers there'll be a 40% discount. Retail price is $816 which makes it $612 with 3+ buyers and $490 with 10+!!! Dirt cheap if I manage to get the 10 buyers. The process is pretty simple but time consuming.

Here's the website for the available grind. Click "PRODUCT SEARCH". http://www.webcamshafts.com/
For bolt on camshaft. I'd go for the 294 grind. It's bolt on.

The process will be:

You will pay for the discounted retail price along with a discount code that was given to me. I'll give the code out once we've reached 10 buyers. Also you'll be paying for the shipping to webcams. I'd suggest giving them a call about the group buy that's being grouped by "Ken Lee" which is me. Talk to Faith, she's the one I'm dealing with btw. I'd expect the cams to be away from you for at least a month. So if your car can't be down for that long, just go to your local junk yard and pull one out from any 5sfe so that's mr2, camry, celica, or rav4.

If you're interested please email me at lee-boi93@hotmail.com or comment below.

For those of you who thinks this is a scam or something you can call webcams at (951) 369-5144. They know me by Ken Lee and they know what I'm up to. Here's also my 6gc.net buyer/seller reputation. http://www.6gc.net/members/ILoveMySilly97/reputation

http://www.6gc.net/forums/index.php?showto...52417&st=20

ok here's the pics.



the cams





and my nose



now the real info



now my motor has 156K miles on it and my compression was low, but consistant.

here's a comparison was another 5s, 1998 51K miles on it



and some #s info



and the INFO

my 5s topped out at 123whp and 126ft/lbs of torque.

on the 1998 stock 5s (intake) at 4700 RPMs it doesn't make any more power, it drops hp like a rock. My 1995 156K 5s continues to make hp. I peaked out close to redline and CONTINUED TO MAKE POWER until then. So at redline (about 6000 RPMs) I had about 123hp while the stock had The stock 5s 103hp. As for torque, the 98 drops off at 4700 and mine continued hold out longer. I had 110ft/lbs of torque and the stock 98 had 92ft/lbs.

The bottom line is I didn't dyno my car before the cams were installed so I don't know exactly were I'm starting from. From the research I've done they seem to average around 105-110hp to the wheels. If my motor was in peak condition like the 98 then I have gained about 10hp to the wheels. The important thing here is my car now holds the power later in the RPM band and where any other stock 5s drops off, my car continues to make power, right to redline.

now when I turbo...

Here's another dyno sheet with intake and tuned.



This post has been edited by ILoveMySilly97: May 5, 2014 - 6:54 PM