6G Celicas Forums

Welcome Guest ( Log In | Register )

> 3sgte 2inch dual exhaust?
post Oct 15, 2014 - 2:18 PM
+Quote Post
Arturio55

Enthusiast
**
Joined Mar 6, '13
From New jersey
Currently Offline

Reputation: 4 (83%)




Gonna be swapping very soon, already have EVERYTHING except the engine itself which ill be getting in the next 2 or 3 weeks.
my car is lowered (slammed) and I only have about 3 inches of clearance under car. Im thinking of moving the cats up towards the front or just deleting them, and then doing 3 inch exhaust tucked into the driveshaft tunnel that goes to a y pipe that splits up into 2 inch dual exhaust for the back half of the car, that way I can go over the rear suspension and have 2 small mufflers that won't get torn off if I hit a bump.

Your thoughts?


--------------------
QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM) *
I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league.

Posts in this topic
- Arturio55   3sgte 2inch dual exhaust?   Oct 15, 2014 - 2:18 PM
- - 4-eyed-freek   If your not concerned about hp gains then i wouldn...   Oct 15, 2014 - 2:22 PM
- - cardshark525   A single 3 inch from what I've read online is ...   Oct 15, 2014 - 8:05 PM
|- - Arturio55   QUOTE (cardshark525 @ Oct 15, 2014 - 8...   Oct 15, 2014 - 9:57 PM
- - Arturio55   That article says dual 2.25 inches can support up ...   Oct 15, 2014 - 10:05 PM
- - mgnt232   Another option I think that could be good for your...   Oct 16, 2014 - 1:21 AM
|- - Arturio55   QUOTE (mgnt232 @ Oct 16, 2014 - 1:21...   Oct 16, 2014 - 2:28 AM
|- - mgnt232   QUOTE (Arturio55 @ Oct 16, 2014 - 3...   Oct 16, 2014 - 3:44 AM
|- - Arturio55   QUOTE (mgnt232 @ Oct 16, 2014 - 3:44...   Oct 16, 2014 - 11:36 AM
- - 4-eyed-freek   you do realize that the turbo it self is a restric...   Oct 16, 2014 - 12:20 PM
|- - Arturio55   QUOTE (4-eyed-freek @ Oct 16, 2014 ...   Oct 16, 2014 - 3:05 PM
- - 4-eyed-freek   Yeah it will flow well, but if you were to do a 2i...   Oct 16, 2014 - 3:23 PM
|- - Arturio55   QUOTE (4-eyed-freek @ Oct 16, 2014 ...   Oct 16, 2014 - 3:31 PM
- - 4-eyed-freek   I get that your car is slammed, and the fact that ...   Oct 16, 2014 - 3:36 PM
|- - Arturio55   QUOTE (4-eyed-freek @ Oct 16, 2014 ...   Oct 16, 2014 - 3:40 PM
- - 4-eyed-freek   i know your car is much lower lol the gt4 runs the...   Oct 16, 2014 - 3:46 PM
|- - Arturio55   QUOTE (4-eyed-freek @ Oct 16, 2014 ...   Oct 16, 2014 - 4:05 PM
|- - mgnt232   QUOTE (Arturio55 @ Oct 16, 2014 - 4...   Oct 16, 2014 - 10:10 PM
|- - Arturio55   QUOTE (mgnt232 @ Oct 16, 2014 - 10:1...   Oct 17, 2014 - 1:25 AM
- - 4-eyed-freek   sorry i never got around to getting those pictures...   Oct 17, 2014 - 11:08 AM
|- - Arturio55   QUOTE (4-eyed-freek @ Oct 17, 2014 ...   Oct 17, 2014 - 1:03 PM
- - 4-eyed-freek   the car is now a 1/5 lower than this picture with ...   Oct 17, 2014 - 11:19 AM
|- - Arturio55   QUOTE (4-eyed-freek @ Oct 17, 2014 ...   Oct 17, 2014 - 1:19 PM
- - Malek   I literally have no space between the body and the...   Oct 17, 2014 - 1:19 PM
|- - Arturio55   QUOTE (Malek @ Oct 17, 2014 - 1:19 P...   Oct 17, 2014 - 1:24 PM
- - 4-eyed-freek   they are 18's   Oct 17, 2014 - 2:27 PM


Reply to this topicStart new topic
11 User(s) are reading this topic (11 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 20th, 2025 - 11:13 AM