 Engine Bearings on Forged Build, OEM Main/TW and ACL Rod? |
 Oct 12, 2015 - 3:57 PM
|
 
|
|
Enthusiast  Joined Jan 22, '06 From Savannah, GA Currently Offline Reputation: 1 (100%)  |
Curious what people think about running mixed bearings. First off, I'll be running Wiseco pistons bored .5 over, Brian Crower rods, on a polished stock crank.
My thoughts are to match numbers on the mains and go with exact OEM for best and tightest fit. I've also read many people think the OEM Thrust washer is ideal. However, since I'm going with forged rods does it make sense to go with an aftermarket bearing such as ACL? I wouldn't be able to match the OEM numbers based on the differences between stock and aftermarket rods but my concern is that the oil clearances will vary between each rod with an aftermarket set. |
Posts in this topic
6G94celica Engine Bearings on Forged Build Oct 12, 2015 - 3:57 PM
Smaay i have built countless turbo engines. I use ACL f... Oct 13, 2015 - 4:01 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 25th, 2024 - 3:18 AM |