Today I.......................................... |
Today I.......................................... |
Mar 1, 2013 - 5:34 AM |
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
I am waiting on my plane to depart
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Mar 1, 2013 - 12:40 PM |
|
Enthusiast Joined Nov 24, '07 From Tucson, Az Currently Offline Reputation: 2 (100%) |
|
Mar 1, 2013 - 1:08 PM |
|
Enthusiast Joined May 29, '09 From Gainesville, FL Currently Offline Reputation: 17 (100%) |
Well that is not good to hear. From the searches I did on the site, users were raving about south bend clutches. Maybe I missed the after reviews... Hopefully that wasn't 235 down the sh!tter On a side note: Pulling into my normal stop in the morning, I saw a surprise. In an effort to get him to 6gc.net and explain how clean his car was, I walked into a pole. Ego quite bruised. |
Mar 1, 2013 - 1:52 PM |
|
Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
????? I've liked my Southbend clutch so far an that's all smaay runs in his cars they make good clutches. -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 n |
Mar 1, 2013 - 2:01 PM |
|
Enthusiast Joined Jun 18, '09 From Orlando Currently Offline Reputation: 8 (100%) |
Soulend bought a six-puck and had a bad experience.
-------------------- '97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE |
Mar 1, 2013 - 2:13 PM |
|
Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
In an effort to get him to 6gc.net and explain how clean his car was, I walked into a pole. Ego quite bruised. sorry but that made me laugh. well. did you get him to join up?? that IS a really clean celi. -------------------- *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
Mar 1, 2013 - 4:04 PM |
|
Enthusiast Joined Nov 24, '07 From Tucson, Az Currently Offline Reputation: 2 (100%) |
Soulend bought a six-puck and had a bad experience. Lies did not buy a six puck. blew through 3 "rally" clutch kits within a year. one went before I could do anything with the car like racing, as well as when my Dad was using it when I was in Japan for two months. that one lasted 6-ish months, the next lasted maybe 2 months normal daily driving. and the 3rd finished off the year and I just swapped to a different clutch kit all together. Company has bad manners and are unwilling to help, ignore calls and emails. blamed me for bad installation when I proved to them on each occasion that I had a Certified mechanic IN A SHOP put each in. the mechanic on each occasion said that it wasn't the cars fault but bad clutches. Smaay can say all he wants about "I've put them in over a 100 cars" but that doesn't stop the fact that company is horrible. This post has been edited by Soulend: Mar 1, 2013 - 4:05 PM |
Mar 1, 2013 - 4:23 PM |
|
Enthusiast Joined Mar 1, '13 From Essex UK Currently Offline Reputation: 0 (0%) |
I Joined the 6gc forum HIIIIIIIIIIII
|
Mar 2, 2013 - 12:26 PM |
|
Enthusiast Joined Oct 24, '09 From Appleton, Wisconsin 54915 Currently Offline Reputation: 7 (100%) |
My friend in Japan got me a great deal on some Projectors, Received the package after the mailman woke me up with the doorbell today.
I open up the package and only 1 broken tab, most likely due to the cold weather. (Was expecting more broken tabs...) Hopefully i'll be installing these today as well. 1 Broken Tab This post has been edited by cyberblader1130: Mar 2, 2013 - 12:27 PM |
Mar 2, 2013 - 12:36 PM |
|
Enthusiast Joined Apr 17, '06 From under your bed. Currently Offline Reputation: 4 (100%) |
... got a SC61 Turbo. Ordered the manifold, T3 adapter, Tial wastegate, dump pipe, down pipe, fmic kit, turbosmart supersonic bov, megan racing oval muffler, and all necessary hardware.
This post has been edited by ExSane: Mar 2, 2013 - 12:38 PM -------------------- |
Mar 2, 2013 - 7:58 PM |
|
Enthusiast Joined Oct 5, '03 From South TX. Currently Offline Reputation: 14 (100%) |
put the 3sgte back together after cleaning out the intercooler and turbo and intake manifold....runs smooth as ice but i confirmed the rod knock
|
Mar 2, 2013 - 8:14 PM |
|
Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
Finally did some work on the 1mz today
only got the pass side axle in but that's a start lol -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235 n |
Mar 2, 2013 - 11:42 PM |
|
Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
Put my harness bar back in today....and then proceeded to put in the harness that has been sitting in my garage for 2 years....
Lets just say I don't like regular seat belts anymore lol Also put it in since I'm getting new tires on Friday, Potenza RE-760 Sports. Coilovers are going on after I get the wheels done so I can lower her and get an alignment. I'll be getting my JSpeed 3 point strut bar this week too. I think the harness will come in handy with the corning and whatnot. |
Mar 3, 2013 - 11:34 AM |
|
Enthusiast Joined May 29, '09 From Gainesville, FL Currently Offline Reputation: 17 (100%) |
Ordered more parts =/
Tie-rod Ends & tie rods, front and rear end-links, the knuckles between the hub and control arm, and 2 front strut mounts w/bearings. Tired of popping, snapping, and creaking. Sanded the GT-four hoods imperfections and getting ready to fill a little. Paint next weekend when its warmer. Now I just need a hood latch, or ghetto weld this one... This post has been edited by rave2n: Mar 3, 2013 - 11:34 AM |
Mar 3, 2013 - 10:54 PM |
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Today I replaced my axles.
Needless to say, my passenger side axle was long overdue. This post has been edited by richee3: Mar 3, 2013 - 10:55 PM -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Mar 4, 2013 - 1:33 AM |
|
Enthusiast Joined Apr 18, '05 From Calgary Currently Offline Reputation: 20 (100%) |
Today I nearly wrecked my car. Today, we had a lot of wet snowfall and the roads were really slippery, but I have set of winter tires on and I'm used to driving in these conditions so no biggie. Well all was good until I decided to overtake a semi on the freeway. The semi was shooting a curtain of heavy slush while cruising at around 90 km/hr, so when the car started taking the hit from the heavy slush, it was enough to push the front end to momentarily lose lateral stability and cause me to spin while going 100 km/hr. The moment the car started spinning, I thought to myself "$hit. at this speed, the car's gonna be totalled when this is over " without any regard of my own well-being. When I started to spin and the car was perpendicular to the lane, I could see the front bumper just inches away from missing the concrete barricade divider, but after spinning another 180 degrees, the rear end hit the divider and I came to a complete stop. Luckily, I was way ahead of the last car behind me so I quickly started her up and drove off. I immediately headed to the nearest carwash to take a closer look. It turns out there wasn't even a scratch on the dirt from the rear bumper! Instead the exhaust tip took all the damage... and it wasn't the muffler tip, but the extended add-on that was welded on the tip! Hell I didn't even thought it extended past the rear bumper! The tip was just bent a little to the right with some scratches on it and I can probably just hammer it straight again LOL! Also, the muffler wasn't making any raspy noises to indicate any sort of exhaust leak which is a plus. I still can't believe how little damage the car took while not taking any body damage. Who would've thought that of all the sides on the car, the one tiny bit, the exhaust tip, would save the car! I'm really glad that I was really lucky today, but more importantly, no innocent souls were involved in this (self-inflicted?) accident.
-------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- |
Mar 4, 2013 - 7:22 AM |
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
whew! ^
-------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
Mar 4, 2013 - 9:37 AM |
|
Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
eek!!! that sounded like a scary experience. glad you came out of it without any damage. be safe.
-------------------- *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
Mar 4, 2013 - 12:06 PM |
|
Enthusiast Joined Mar 6, '04 From Charlotte, NC Currently Offline Reputation: 9 (100%) |
Glad you weren't injured AND that the car emerged fairly unscathed Gerald; definitely, a hair raising situation.
Today, I will probably go to Pull-A-Part to look at the '95 Celica they now have on the lot; will take pictures and report if anything is worth pulling. :] -------------------- Has no more Celicas
|
Mar 4, 2013 - 2:31 PM |
|
Enthusiast Joined Feb 28, '03 From So-Cal Currently Offline Reputation: 1 (100%) |
ordered these..
finally!! cant wait til they come in. |
Lo-Fi Version | Time is now: November 30th, 2024 - 6:15 AM |