celica gt4 st205 wheel bearing, help on wheel bearings Options

[96gt4cel]

I have looked.everywere if anyone.knows were i can get new wheel.bearing.for.my gt4 st205 please let me kno or if i can use a.bearing.from another car??

[playr158]

http://www.fensport.co.uk/Parts/Model_19/Category_3/

[azian_advanced]

for the rears, you can use the same as stock ST204/AT200, but for the fronts, no other car shares the same as the ST205 (except maybe the ST202 SS-III with superstrut suspension) so you'd have to order them overseas. tcbparts.co.uk supplies the full front bearing kit with new seals, bearing grease, and what not.

[BonzaiCelica]

uhh are you guys entierely sure on this. everytime someone asks this questions euro guys chime in and say the no other chassis 6gc is compatible with st205.

USA of America axle fits perfectly into a gt4/ss3 hub/knuckle/superstrut suspension.

This post has been edited by BonzaiCelica: Sep 11, 2014 - 10:21 PM

[BonzaiCelica]

the wheel bearing for both superstrut and mcpherson suspension are the same. in fact, celicas since 86 as well as most corolla's and camry's share the same wheel bearings.
part number: 90369-38003-77

ahaha c'mon azian see i knew it was you that said it! but when i type in this part # into toyodiy. it pulls up this page for the front bearings no?

http://www.toyodiy.com/parts/xref?v=J_1999...38003&mJ=on


This post has been edited by BonzaiCelica: Jul 29, 2013 - 9:43 PM

[azian_advanced]

i apologize, but i was wrong when i made that post.

the rear wheel bearings on the ST205 match the st204/at200 fronts and rear. note that the st204/at200 have the same wheel bearings on all four corners. however, the ST205 fronts have an outer race diameter that is about half a centimeter larger after comparing them side-by-side. i know this now because I replaced all 4 wheel bearings on my GT-Four within the past year.

i searched for other cars that shares the same bearings as the st205 fronts, but from my findings, no other toyota shares the same bearing dimensions (width and inner/outer diameters).

hope this clears everything.

[BonzaiCelica]

ha im confused still but this isn't for me so i hope the thread starter understands!

btw we can't buy the rear bearings by itslef for our usdm cars they come as the whole bearing and hub mushed together

[azian_advanced]

you're right... today just isn't my day. lol

[czwalga]

The fronts on the st204 fit the rear of the st205. I know first hand, have pressed them in.

[96gt4cel]

Thank you everyone i appreciate the help

[BonzaiCelica]

The fronts on the st204 fit the rear of the st205. I know first hand, have pressed them in.

resurrection ok i can confirm to this as well. the ST205 bearing is bigger than the Mcpherson front bearing.

however im looking online here at the toyodiy and toyotamarket.ru and can't seem the find the part numbers for the ST205 and ST202 superstrut front wheel bearing. are they the same part number??

looking here on fensport and it seems as though the GT-Four and ST202 Superstrut share the same front wheel bearing

ST205 Link
http://www.fensport.co.uk/Parts/Model_19/Category_3/2004

ST202 Superstrut Link
http://www.fensport.co.uk/Parts/Model_14/Category_3/2004

This post has been edited by BonzaiCelica: Sep 1, 2014 - 6:17 PM

[BonzaiCelica]

bump