 Caldina Alloy Problem |
 Oct 23, 2013 - 12:03 AM
|
 
|
 Enthusiast  Joined Sep 23, '12 From Australia Currently Offline Reputation: 4 (100%)  |
Okay, well I am in the process of installing 17" Caldina Alloys onto my car...
My problem is in this part of the car/wheel:   Basically, the wheel was quite difficult to get to sit properly when installing them, and then when I was removing the wheel It wouldn't come off at all.. As if it was wedged onto the car... I had to put my whole body weight onto the wheel to get it off the car, both sides where the same... The only thing I can think of causing this is the round part shown above which slips onto the car... Anyone got any ideas what I could do to stop this, because it doesn't feel correct at all... Or anyone currently running on Caldina alloys have the same problem? This post has been edited by rentaspace: Oct 23, 2013 - 4:21 AM --------------------  ------------------------------| White '94 Celica | Bought 11/05/12 | Sold 12/05/15 |------------------------------ |
Posts in this topic
rentaspace Caldina Alloy Problem Oct 23, 2013 - 12:03 AM
Box Unless something is off with the hub perhaps. Nor... Oct 23, 2013 - 12:38 AM
rentaspace QUOTE (Box @ Oct 23, 2013 - 1:38 AM)... Oct 23, 2013 - 12:51 AM Box Paint would just chip off after awhile, could try ... Oct 23, 2013 - 1:37 AM Neon90424 Everything in australia is illegal. Oct 23, 2013 - 1:49 AM rentaspace Rust converter is easy to get, and yeah I know it ... Oct 23, 2013 - 1:54 AM richee3 Definitely clean up the hub and the center bore in... Oct 23, 2013 - 4:08 AM rentaspace QUOTE (richee3 @ Oct 23, 2013 - 4:08... Oct 23, 2013 - 4:14 AM njccmd2002 Yup rust is your problem, clean them. Or is it il... Oct 24, 2013 - 8:28 PM rentaspace QUOTE (njccmd2002 @ Oct 24, 2013 - 8... Oct 27, 2013 - 11:42 PM njccmd2002 if its hard to come out, then why worry, do you wa... Oct 27, 2013 - 11:46 PM rentaspace QUOTE (njccmd2002 @ Oct 28, 2013 - 12... Oct 28, 2013 - 7:00 AM njccmd2002 To avoid it from seizing in the future, I have som... Oct 28, 2013 - 12:49 PM rentaspace QUOTE (njccmd2002 @ Oct 28, 2013 - 1... Oct 28, 2013 - 4:42 PM Box Some petroleum jelly or lithium grease would work ... Oct 28, 2013 - 5:19 PM rentaspace QUOTE (Box @ Oct 28, 2013 - 6:19 PM)... Oct 28, 2013 - 11:00 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 28th, 2024 - 11:29 PM |