 Distributor rebuilt - INNER oil seal replacement, Who has it done? |
  |
 May 25, 2014 - 3:27 PM
|
 
|
|
Enthusiast  Joined May 2, '06 From Nevada Currently Offline Reputation: 0 (0%)  |
Ok, a kit is available. I got stuck on the pin removal. Which side to strike - they both look the same thickness? And it does not come out, does not move at all! How to do it? Please share in detail this part of the procedure. The rest seems to quite simple.
Thanks! |
|
May 26, 2014 - 9:10 AM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
Getting that pin out is a huge pain. I don't think it matters which side you strike it on. You will need a good quality punch and something like a 5lb hammer, and a lot of patience. Doesn't hurt to spray some wd40 in there too.
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
May 26, 2014 - 10:52 AM
|
|
 Enthusiast Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%) |
QUOTE (valerit1 @ May 25, 2014 - 3:27 PM)  Ok, a kit is available. I got stuck on the pin removal. Which side to strike - they both look the same thickness? And it does not come out, does not move at all! How to do it? Please share in detail this part of the procedure. The rest seems to quite simple. Thanks! If all else fails a machine shop will gladly press it out for you. I'd try using an icepick and a hammer. |
|
May 29, 2014 - 6:39 PM
|
|
|
Enthusiast Joined May 2, '06 From Nevada Currently Offline Reputation: 0 (0%) |
What punch size is it? Thanks!
QUOTE (lagos @ May 26, 2014 - 9:10 AM) Getting that pin out is a huge pain. I don't think it matters which side you strike it on. You will need a good quality punch and something like a 5lb hammer, and a lot of patience. Doesn't hurt to spray some wd40 in there too. |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 12:43 PM |