Today I.......................................... Options

[ClevelandGaint]

Just checked my tracking on my dark face gauge cluster inserts and they have been delivered. Crappy part is, not home to play with my new stuff yet

[MisterRay]

Just checked my tracking on my dark face gauge cluster inserts and they have been delivered. Crappy part is, not home to play with my new stuff yet

I think I'm more excited about them than you are lol lookin forward to seeing them installed. take pics if possible!

my tracking info says mine is somewhere in LA at the moment

This post has been edited by MisterRay: Jun 20, 2014 - 7:50 PM

[ClevelandGaint]

Just checked my tracking on my dark face gauge cluster inserts and they have been delivered. Crappy part is, not home to play with my new stuff yet

I think I'm more excited about them than you are lol lookin forward to seeing them installed. take pics if possible!

my tracking info says mine is somewhere in LA at the moment

I been excited, ill take some before and after pics, hopefully everything goes smoothly with them. Gonna try and do it with out taking the needles off

[MisterRay]

Just checked my tracking on my dark face gauge cluster inserts and they have been delivered. Crappy part is, not home to play with my new stuff yet

I think I'm more excited about them than you are lol lookin forward to seeing them installed. take pics if possible!

my tracking info says mine is somewhere in LA at the moment

I been excited, ill take some before and after pics, hopefully everything goes smoothly with them. Gonna try and do it with out taking the needles off

i was thinking of doing the same thing lol hopefully can just lift around the needle like one of those fun fair games where u cant touch the sides

on a side note. do you or any1 else know of any good silver paint codes/sample pics? im looking for something that has a pearl effect or a verrrrry slight flip to it

[ClevelandGaint]

on a side note. do you or any1 else know of any good silver paint codes/sample pics? im looking for something that has a pearl effect or a verrrrry slight flip to it
[/quote

I do custom paint work, as seen on my 3000gt, but all i use is house of kolor products, take a look at the link and scroll down half a page and you can see all types of sillver, they all pop in sunlight

http://www.houseofkolor.com/speedshapes/sp...pes_shimrin.jsp

Shimrin Metajuls is the type your going to be looking at, hope it helps

[MarbleFlame]

Today I debadged the boot lid All except the toyota symbol

[MisterRay]

Today I debadged the boot lid All except the toyota symbol

Nice I will have to do that soon and paint the emblems black aswel.

[Box]

Removing the badges was the second best exterior modification I did, the first was removing the ugly generic antenna.

[MisterRay]

Removing the badges was the second best exterior modification I did, the first was removing the ugly generic antenna.

Lol yeah the standard antenna used to annoy me so much! got a bee sting on at the moment.

there's a hole on my back box and it sounds like a damn moped. gna have to replace it soon. do u know what size I need as I'm lookin to get a universal fartbox so it atleast sounds a lil louder than the whimper it has now. maybe a savage one?

[Box]

2" or 2.25" was factory. Get a baffled muffler so you don't sound like a humbled bee.

[MisterRay]

2" or 2.25" was factory. Get a baffled muffler so you don't sound like a humbled bee.

are those the tuneable back boxes? I was looking at a 3" tuneable one. jus a standard universal one.

[MisterRay]

On my way to go get the exhaust checked

edit: just had it checked. the joints have corroded away on the rear and mid sections. will need both sections now. also Cat might not be saved as the joints on that section are corroded 2. might aswel get a SS one or something so any suggestions for a full exhaust and prices etc?

This post has been edited by MisterRay: Jun 22, 2014 - 8:37 AM

[Keiri]

Yesterday, I broke 192,000 miles - I've put 30k on the rebuilt engine in 2 years.

Today, I went to Pull-A-Part and looked at the 94 GT they got in on Friday.

This post has been edited by Keiri: Jun 22, 2014 - 9:17 AM

[The_enD]

Working on a Sunday. People need their bezels, you know.

[cyberblader1130]

Working on a Sunday. People need their bezels, you know.

Way to make us feel bad!
Finally got my last 2 speakers in for the Celi, they were on back order for a long time.

[Box]

On my way to go get the exhaust checked

edit: just had it checked. the joints have corroded away on the rear and mid sections. will need both sections now. also Cat might not be saved as the joints on that section are corroded 2. might aswel get a SS one or something so any suggestions for a full exhaust and prices etc?

Baffled mufflers have walls, baffles, in them that divert the frequencies and remove harshness from the tone. As far as exhaust goes using galvanized steel will be fine, and should be considerably cheaper.

This post has been edited by Box: Jun 22, 2014 - 3:08 PM

[MisterRay]

On my way to go get the exhaust checked

edit: just had it checked. the joints have corroded away on the rear and mid sections. will need both sections now. also Cat might not be saved as the joints on that section are corroded 2. might aswel get a SS one or something so any suggestions for a full exhaust and prices etc?

Baffled mufflers have walls, baffles, in them that divert the frequencies and remove harshness from the tone. As far as exhaust goes using galvanized steel will be fine, and should be considerably cheaper.

SS downpipe is 70. midsection is 80 and backbox (universal with a 2" inlet and a 3.5" tuneable outlet) is 50. can pick up a cat converter for 70ish aswel so it's pretty cheap. galvanised steel 1s maybe cheaper but I have a lot of difficulty finding them unfortunately.

[njccmd2002]

my car is almost ready

[Lamont]

Picked this up locally for $150 previous owner swapped it out for a MR2 Turbo LSD



Now if only I had some missing information, I could possibly make an engine choice

[Box]

On my way to go get the exhaust checked

edit: just had it checked. the joints have corroded away on the rear and mid sections. will need both sections now. also Cat might not be saved as the joints on that section are corroded 2. might aswel get a SS one or something so any suggestions for a full exhaust and prices etc?

Baffled mufflers have walls, baffles, in them that divert the frequencies and remove harshness from the tone. As far as exhaust goes using galvanized steel will be fine, and should be considerably cheaper.

SS downpipe is 70. midsection is 80 and backbox (universal with a 2" inlet and a 3.5" tuneable outlet) is 50. can pick up a cat converter for 70ish aswel so it's pretty cheap. galvanised steel 1s maybe cheaper but I have a lot of difficulty finding them unfortunately.

My local shop uses galvanized as standard and stainless on request. Doesn't sound like too bad a deal then, especially if you plan to keep the car for some time.

my car is almost ready

And the townspeople rejoice!