WTB [URGENT!!!] AC/alternator harness pigtail, mine melted.... Options

[conus00]

I need AC/alternator harness pigtail (assuming that GT and ST have same harness). with all the connectors intact - the alternator plug, AC plug and one more (not sure what it is?). Mine in car melted and right now is being held together by spit...
I need this very urgently because, as of now, my alternator is not charging battery at 100% (my battery light on dash is on)!!!

I was gone for a while and just realized that 6GC does not allow linking pics from photobucket anymore but I can send you a pic of exactly what I need.

THX

[Smaay]

so use another image host.

the other sensor is probably the oil pressure sensor.

I have the oil pressure sensor plug and a pigtail. I dont have the AC or alternator. but i do have the part numbers for them. you can get them from toyota


alternator is 90980-11349

AC plug is 90980- (crap its at home and im on travel)

[VavAlephVav]

also if you need one right away the Camry has the same 2.2L motor and the Corolla the 1.8L, dozens of them in the salvage yard.
the wirelimb is not the same but it has many of the same plug connectors, they just may be using different color wires.

[conus00]

BUMP. I can't believe that with so many members nationwide nobody has an access to a wrecked Celica/Corolla...

[mkernz22]

You should be more worried about what caused your plugs to melt....there must be something up with your car and the same thing will happen if you replace them..

This post has been edited by mkernz22: Aug 26, 2014 - 5:57 PM

[conus00]

I know exactly what did it: aftermarket headers. Even though I have wrapped them in thermal wrap they still, I guess, generate too much heat... I'm already thinking about creating some sort of a heat shield on the alternator side.