FS - rear strut bar, clear side markers, cluster (Km) Options

[SirJules]

Rear strut tower bar, cover is in good shape, missing pull tab on the zipper, scratches in the bolt hole areas,
90$ Cad shipped in Canada.


Clear depo brand side markers, ., no cracks, all tabs intact, no screws.
side markers have some clouding/dirt, could never keep moisture from not getting into them, no bulbs or sockets with the side markers as the stock ones fit inside of them.
25$ CAD shipped in Canada.
TURNS HAVE BEEN *SOLD*


Splitters *SOLD*

MOMO Wheel *SOLD*

Coilovers *SOLD*

Cluster currently being used in my car (ST204) made this one from 2 different clusters, got my hands on a st205 cluster that has the carbon fiber Tom's
bezel and swapped it over to mine as well as the rpm and speed gauges from the st205 cluster, would sell for the right price as I don't find too much info
on the tom's bezel piece, only one I saw was going for 250 USD a while back online.




Parts for a Thule roof rack, I have the Thule 231 fit kit and the Thule 477 Short roofline adapter, Still needs the older 400xt feet and 50 inch load bars, the feet and bars are easier to find in the used market,
100$ Cad plus shipping costs to your location.



Most cases shipping to the states is usually $10 more

This post has been edited by SirJules: Sep 26, 2015 - 4:12 PM

[xion]

Hey,

Were in Canada are you located? I might be able to come pickup those tail lights thanks!

[SirJules]

Hey,

Were in Canada are you located? I might be able to come pickup those tail lights thanks!

Whoops, thought I had that in my profile, located in Fredericton NB, a little far to come pick up.

[xion]

Sending you a pm!

[hoodedone]

SOLD SOLD SOLD Kouki taillights, amber removed. Red led bulbs for the turns, White Led reverse bulbs and Red Led brake bulbs. Has resistors installed so no hyper flash, no nuts.
no cracks, 100% of bezel intact, 150$ Cad plus your shipping costs. SOLD SOLD SOLD




Rear strut tower bar, cover is in good shape, missing pull tab on the zipper, scratches in the bolt hole areas, 70$ Cad plus shipping costs.



Pre facelift clear depo brand turns and clear side markers, 60$ CAD for all 4 plus shipping., no cracks, all tabs intact, no screws, turns have extra bulb sockets and orange turn bulbs in them.
side markers have some clouding/dirt, could never keep moisture from not getting into them, no bulbs or sockets with the side markers as the stock ones fit inside of them.

Interested in the preface lights, how much to 93702 CA

[SirJules]

New stuff posted.

[nics]

How much shipping for the strut tower bar to M6A 1X5?

[SirJules]

How much shipping for the strut tower bar to M6A 1X5?

15$ for shipping.

[SirJules]

Added my Tanabe sustec pro coilovers.

[ZoomZoom]

How much kms on the coilovers?

[jordisonjr]

Is it possible to get those splitters to sit flush with the body, without trimming/cutting the material and re-fiberglassing?

[SirJules]

How much kms on the coilovers?

I have about 6000 on them over the last year but I am the second owner, I got them from a japan auction about a year ago, removed in the fall and put my stock struts back on as I didn't want to ruin them.

[SirJules]

Is it possible to get those splitters to sit flush with the body, without trimming/cutting the material and re-fiberglassing?

Not sure, the ss splitters are designed for the facelift bumper and mine id pre facelift, plus my lower section of my fenders are probably a little out of shape, i have not plastics underneath the car and i have no fender liner in that area causing my fenders to be a little out of shape, the gap was bigger when i first tried to put them on but as I tweaked the lower portion of the fender out the gap got a little smaller.

[SirJules]

Added pics of coilovers, can send detailed pictures direct to your email, just send me off a PM.

[PegGTS]

Willing to sell the clear turns separate?

[SirJules]

Coilovers added.

This post has been edited by SirJules: Sep 9, 2015 - 8:07 PM