GB for cross drilled/ slotted rotors, $90 a pair if we get 10+ Options

[Neipas09]

I'm a definate as long as they are slotted and drilled, and i can get some kind of break on shipping since i'll be ordering 2 sets and want them shipped together.

[1bwilson]

Neipas, Ijust emailed him about the shipping but that is out of my hands if I can't get it down. I will have an idea of the costs tho.

This is the list thus far. If anyone is listed wrong or is not listed please cut and paste yourself on or off in a new reply.

-Bryan-

List (for sure):
1bwlison
boibleu22
Jussimple
forkee
gh0st d0g

List (maybe):
Benevolence
Neipas09
presure2
stelica85
98celica3
nik
No0bOne
k2 celica
ashleyzredcelica

[Coomer]

I'd be interested, but I'm trying to save my money for a swap during the summer, so I guess I'll have to pass this one up.

Moved to Buying/Selling

[1bwilson]

Rotors can be done as follows: Cross drilled , slotted , Both. I asked about shipping and they said sa an example 4 rotors should be about $35.

-Bryan-

[presure2]

hey bryan any word on plating?

[98celica3]

i'm in for front and back slotted and drilled. If they are the same price.
adam

[1bwilson]

QUOTE (presure2 @ Mar 23, 2003 - 6:46 AM)

hey bryan any word on plating?

No plating. All you have to do is paint them b4 you install them and you'll be fine.

Fronts are the same price as the backs.

-Bryan-

List (for sure):
1bwlison (front, back: slotted)
boibleu22
Jussimple
forkee
gh0st d0g
98celica3 (front, back: slotted & drilled)

List (maybe):
Benevolence
Neipas09
presure2
stelica85
nik
No0bOne
k2 celica
ashleyzredcelica

This post has been edited by 1bwilson: Mar 23, 2003 - 11:04 PM

[presure2]

sorry im out

[Jeremy1210]

what does the plating do?

[94celicaguy]

count me in!!!!

[boosted_K2]

looks like im going to pass too, i changed my brakepads the other day and all the braking problems stopped and my rotors are lookin pretty good. thanks anyways!!

[PdiddyGT]

Count me in!!! When can we get em soon i hope what would you paint them with that would not rub off?

[1bwilson]

Sorry to hear aboput that pressure and K2. Maybe next time .

Plating is away of rust proofing. I think they use zink but I'm not sure. You can paint them with any kind of rustolium (sp?) paint. The paint will rub off where the pad meets the surface of the rotor but that is a given. 2 more and we can place the order. Please state how you would like your rotors set up and what you need (ex. fronts and backs slotted fronts and cross drilled backs)

New list

List (for sure):
1bwlison (front, back: slotted)
boibleu22
Jussimple
forkee ( front: slotted & cross drilled)
gh0st d0g (front: slotted)
98celica3 (front, back: slotted & drilled)
PdiddyGT
94celicaguy

List (maybe):
Benevolence
Neipas09
stelica85
nik
No0bOne
ashleyzredcelica
zoom

This post has been edited by 1bwilson: Mar 26, 2003 - 2:40 AM

[Zoom]

I'm pretty interested but I got some questions I figure you as an expert can answer;) :

- I just replaced my front rotors with stocks, but my backs are starting to go. Is it going to be wierd with slotted/drilled rotors just in the back?
- Is the price with shipping or without (was a little confused with all the response posts).
- How much is the paint going to cost me would you say.
- Any real advantages between drilled and slotted?

[1bwilson]

Zoom-
i think its up to you if it looks wierd or not. If it were me I would get both neway.

shipping is not included.

$2.95.....I don't know! Go to Home Depot and look.

From what I have learned both help with the cooling of your brakes. I perfer slotted B/C they tend to be forged into the rotor as the cross drills are drilled into the rotor after the fact (this may have an effect to the strenth of the rotor)

In?

-Bryan-

[Zoom]

Sht man I gotta think about it I know you said no maybe's, just put put me as maybe, 1-2 days. I'll know by Thursday.

[1bwilson]

QUOTE (Zoom @ Mar 25, 2003 - 5:16 PM)

Sht man I gotta think about it I know you said no maybe's, just put put me as maybe, 1-2 days. I'll know by Thursday.

K

-Bryan-

[forkee]

<---slotted and cross drilled, just the front (i have an ST )

[1bwilson]

I am going to keep a updated list on the top of the first page.

-Bryan-

[PdiddyGT]

I want Front and back Drilled and slotted. Tell me where to send the cash.