Angel eye kits Options

[playr158]

kits would include

2 angel rings
2 LEDs (RED/WHITE/YELLOW/GREEN/BLUE) mounted in rings
wiring for both
detailed instructions with pictures


cost would be ruffly 30$-50$ depending

This post has been edited by playr158: Feb 20, 2007 - 11:30 PM

[j0e_p3t]

i saw a kit from ebay for about 30 bucks. but i think i'd rather get it from you since it'll be made for our celicas with instructions and pics and what-not.... but that's only if it'll be about the same price.

This post has been edited by j0e_p3t: Feb 20, 2007 - 10:32 PM

[jason]

im deff in, would you make the cuts as close to 360° around as you could?

also, im a little worried about my headlight housings, if i take my finger nail and scrape lightly they break apart around the edges, so thats the main reason why i havent done this because im afraid im gonna F them up if i take the lens off =/ but id deff be in

[Jaws4God]

pics?

[playr158]

1st post for pics

and yes i do mine in as full of a circle as possible with the marks or if you note otherwise i can do changes
for most NON WHITE colors i could probably get them off for about 35$ shipped

This post has been edited by playr158: Feb 20, 2007 - 11:30 PM

[95CelicaST]

I'd be interested, but you already have some of my money

[j0e_p3t]

35 shipped doesn't sound too bad. what's the diameter on these gonna be?

[playr158]

I made piros the size of the Jiffy peanut butter top! it worked out to be a very good fitting size and between 3.5 to 4 inches in diameter

and if you are scared to open up your highbeams they can be removed very easily and you can ship them to me i will install and reship them with in 1 business day! (this adds cost via shipping)

[j0e_p3t]

looks awesome. will the instructions include how to wire them into our car? i think that's where i'ma need the most help.

[RbrtNdrws]

Is that the high or low beam light?

[playr158]

posted pics are HIGH BEAM but you can install low beam as well...just normally highs look better
and yes you will get FULL instructions on how to wire them in.
be it switch or with your normal running lights!

[j0e_p3t]

sweet. still interested.

[cjh4l22]

totally in. was considering making some myself but hell i'd much rather pay and get some made. esp if they look as good as the picture

[LeonStryfe]

car pics btw i installed these guys on and it was great for awhile until LEDs dies on you. Then the process of taking off the bumper, taking offthe Highs and taking baking them to take of the lense takes place all over again. Too much work

[RbrtNdrws]

Shouldn't die on you if you install the correct resistor. LED's are supposed to last a long time as long as they are ran at the correct voltage. Idk maybe I'm completely wrong but the lights on my 7th gen lasted for as long as I owned the car.

This post has been edited by RbrtNdrws: Feb 21, 2007 - 12:42 PM

[raj1]

would you deliver to the uk? if so i would be up for it

[frosty]

sounds sweet, and the 1st pic looks good.

I don't need more pics, but do you have them? Some installed completly in the car would be sweet.

good job man

[playr158]

piros car @ night via cell phone picture he sent me

i don't mind shipping to the UK either

LEDs should last for years..if they burnt out u did it wrong

This post has been edited by playr158: Feb 21, 2007 - 3:05 PM

[raj1]

Thats cool im in then!

[playr158]

I will have a new thread in the BS/FS thread in a day or two

This post has been edited by playr158: Feb 21, 2007 - 3:24 PM