Parts needed to make a beams 3sge? Options

[GER-CELI]

What parts i need to make my 3gen 3sge to beams?
Or its better to swap?

[pasqual]

What parts i need to make my 3gen 3sge to beams?
Or its better to swap?

I did this swap 4 months ago ...

what you need is :

exhaust Y pipe

and top of air-box ..

if you dont have with beams engine You need MAF sesnsor

swap is PnP ......no problems


1. Air intake + MAF sensor (beams -> right )



2. Y-pipe (beams bellow)






3. You need cut and make longer wiring (about 1m ...RHD to LHD conversion)
(I will make photo later)

I see You are located in Germany ... Im in Brno CZ

This post has been edited by pasqual: Jan 20, 2008 - 12:21 PM

[GER-CELI]

no more?
camshafts....

did u feel the difference.

u cam efrom poland, where u get the parts , and how expensive?

[Kadett]

no more?
camshafts....

did u feel the difference.

u cam efrom poland, where u get the parts , and how expensive?

You cant just swap in some parts designed for the BEAMS, you need the ENTIRE engine.

[pasqual]

no more?
camshafts....

did u feel the difference.

u cam efrom poland, where u get the parts , and how expensive?

no more parts needed ........ read my prev post .. I edited it ...

camshaft are ok and will fit beams gearbox ....

difference is BIG LSD power etc .....

I get parts from ASO not so much expensive ... I will provide You later ...

so Do you have Your beams ???? or just thinking about buy it ???

I have only one problem (I dont have time to fix it ) old RPM gauge dont want work .... with beams (diff signal ... )

[GER-CELI]

before my corolla was crashed, i´d ordered an 4efte, but i dont need it
This importeur does have an Beams, grey or red top.

now i had to decide

[pasqual]

before my corolla was crashed, i´d ordered an 4efte, but i dont need it
This importeur does have an Beams, grey or red top.

now i had to decide

or maybe swap 3s-gte rev3 from MR2 (LSD ) .. more complicated but .... more power ..turbo etc

[Kwanza26]

I did this swap 4 months ago ...

what you need is :

exhaust Y pipe

and top of air-box ..

if you dont have with beams engine You need MAF sesnsor

swap is PnP ......no problems

1. Air intake + MAF sensor (beams -> right )

3. You need cut and make longer wiring (about 1m ...RHD to LHD conversion)
(I will make photo later)

I see You are located in Germany ... Im in Brno CZ

Huh???? You don't make sense. I think you misunderstood the question.

Anyway... to make your 3rd gen 3SGE into a beams, you'll need a COMPLETE Beams head with both manifolds and all sensors. You'll need Beams pistons, and finally, the exhaust pipes and intake studd mentioned. It's easier to just swap in a Beams.

[pasqual]

I did this swap 4 months ago ...

what you need is :

exhaust Y pipe

and top of air-box ..

if you dont have with beams engine You need MAF sesnsor

swap is PnP ......no problems

1. Air intake + MAF sensor (beams -> right )

3. You need cut and make longer wiring (about 1m ...RHD to LHD conversion)
(I will make photo later)

I see You are located in Germany ... Im in Brno CZ

Huh???? You don't make sense. I think you misunderstood the question.

Anyway... to make your 3rd gen 3SGE into a beams, you'll need a COMPLETE Beams head with both manifolds and all sensors. You'll need Beams pistons, and finally, the exhaust pipes and intake studd mentioned. It's easier to just swap in a Beams.

for me is clear for beams swapo You need buy comlete beams engine (exhaut , harnes ,all sensors etc )

He just told us he have ordered 4efte for corolla and want change order for beams (means comple beams engine )

......i´d ordered an 4efte, but i dont need it frown.gif
This importeur does have an Beams, grey or red top.


ok maybe my mistake topic(question) is not about swap just make beams

so ...I forgot add one part more

1. BEAMS

a) (best chose is RedTop manual from celica st202 jdm .... but can be from mr2)



This post has been edited by pasqual: Jan 20, 2008 - 2:19 PM