6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> turbo question
post Jun 30, 2008 - 1:14 AM
+Quote Post
95celicastLSR

Enthusiast
**
Joined Nov 16, '06
From Findlay,Oh
Currently Offline

Reputation: -1 (33%)




i currently have a hybrid t3 50 trim turbo that i bought used and was set up for internal wastgate..i wanna run an external wastgate but i need to know if you leave the hole open or shut where the internal wastegate acctuator closes and opens.. i was goin to take an edducated guess and assum you have to weld it shut but want to make sure thats right before i go ahead and do that ....Thanx lance
post Jun 30, 2008 - 1:12 PM
+Quote Post
GTSOwner

Enthusiast
**
Joined Sep 28, '06
From Montreal, QC, Canada
Currently Offline

Reputation: 2 (100%)




Unplug the wastegate actuator and weld the flapper shut.


--------------------
One o'dem crazy Canadian freaks, eh?
post Jun 30, 2008 - 6:37 PM
+Quote Post
95celicastLSR

Enthusiast
**
Joined Nov 16, '06
From Findlay,Oh
Currently Offline

Reputation: -1 (33%)




QUOTE (GTSOwner @ Jun 30, 2008 - 7:12 PM) *
Unplug the wastegate actuator and weld the flapper shut.

all the wastegate stuff has allready been taken off...thnx
post Jul 4, 2008 - 12:53 PM
+Quote Post
trd94



Enthusiast
***
Joined Jan 9, '05
From green springs ohio
Currently Offline

Reputation: 1 (100%)




QUOTE (95celicastLSR @ Jun 30, 2008 - 6:37 PM) *
QUOTE (GTSOwner @ Jun 30, 2008 - 7:12 PM) *
Unplug the wastegate actuator and weld the flapper shut.

all the wastegate stuff has allready been taken off...thnx

hi lance , whats up . all you have to do is get a flange with the hole blocked off and then you can run a external wastegate , make sure to get a gasket with it as well . if you need any help just call biggrin.gif


--------------------
IPB Image
post Jul 5, 2008 - 12:28 PM
+Quote Post
95celicastLSR

Enthusiast
**
Joined Nov 16, '06
From Findlay,Oh
Currently Offline

Reputation: -1 (33%)




QUOTE (trd94 @ Jul 4, 2008 - 5:53 PM) *
QUOTE (95celicastLSR @ Jun 30, 2008 - 6:37 PM) *
QUOTE (GTSOwner @ Jun 30, 2008 - 7:12 PM) *
Unplug the wastegate actuator and weld the flapper shut.

all the wastegate stuff has allready been taken off...thnx

hi lance , whats up . all you have to do is get a flange with the hole blocked off and then you can run a external wastegate , make sure to get a gasket with it as well . if you need any help just call biggrin.gif

just trying to get this car done but waiting on some more money for the tune and my aem piggyback im using. Pure tunning is goin to do the tune and they have to custom wire the aem F/IG controler in for me but other than that when i install everything you more than welcome to help me out..thnx again!!

Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 9th, 2024 - 7:06 AM