turbo question |
turbo question |
Jun 30, 2008 - 1:14 AM |
|
Enthusiast Joined Nov 16, '06 From Findlay,Oh Currently Offline Reputation: -1 (33%) |
i currently have a hybrid t3 50 trim turbo that i bought used and was set up for internal wastgate..i wanna run an external wastgate but i need to know if you leave the hole open or shut where the internal wastegate acctuator closes and opens.. i was goin to take an edducated guess and assum you have to weld it shut but want to make sure thats right before i go ahead and do that ....Thanx lance
|
Jun 30, 2008 - 1:12 PM |
|
Enthusiast Joined Sep 28, '06 From Montreal, QC, Canada Currently Offline Reputation: 2 (100%) |
Unplug the wastegate actuator and weld the flapper shut.
-------------------- One o'dem crazy Canadian freaks, eh?
|
Jun 30, 2008 - 6:37 PM |
|
Enthusiast Joined Nov 16, '06 From Findlay,Oh Currently Offline Reputation: -1 (33%) |
|
Jul 4, 2008 - 12:53 PM |
|
Enthusiast Joined Jan 9, '05 From green springs ohio Currently Offline Reputation: 1 (100%) |
Unplug the wastegate actuator and weld the flapper shut. all the wastegate stuff has allready been taken off...thnx hi lance , whats up . all you have to do is get a flange with the hole blocked off and then you can run a external wastegate , make sure to get a gasket with it as well . if you need any help just call -------------------- |
Jul 5, 2008 - 12:28 PM |
|
Enthusiast Joined Nov 16, '06 From Findlay,Oh Currently Offline Reputation: -1 (33%) |
Unplug the wastegate actuator and weld the flapper shut. all the wastegate stuff has allready been taken off...thnx hi lance , whats up . all you have to do is get a flange with the hole blocked off and then you can run a external wastegate , make sure to get a gasket with it as well . if you need any help just call just trying to get this car done but waiting on some more money for the tune and my aem piggyback im using. Pure tunning is goin to do the tune and they have to custom wire the aem F/IG controler in for me but other than that when i install everything you more than welcome to help me out..thnx again!! |
Lo-Fi Version | Time is now: December 5th, 2024 - 6:11 PM |