Roll Cage, can it be done? |
Roll Cage, can it be done? |
Aug 30, 2008 - 1:57 PM |
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
guys I was in a bad accident with a friend of mine a few weeks ago and am still recovering. He had a small subaru and it got killed being t-boned only at 30 mph. so I want to install more protection for myself in my 96 celica gt by adding reinforcement cage inside. can it be done???
|
Aug 30, 2008 - 2:25 PM |
|
Enthusiast Joined Aug 3, '07 From Bellevue, Nebraska Currently Offline Reputation: 28 (100%) |
the scooby got killed, but he's ok right?
-------------------- ~Andy
Check out my Droid Goodies | My Flickr |
Aug 30, 2008 - 2:43 PM |
|
Enthusiast Joined Mar 29, '07 From Philly Currently Offline Reputation: 11 (100%) |
i am looking to do the same thing eventually...unless you get one custom made i dont know of any other places that sell rollcages for our cars but this place:
http://www.rhdjapan.com/category-low/TOYOT...ca/Handling/4/3 write them and see if they will fit in a Left-hand drive celica...im pretty sure the 4,5,and 6 points will but im not 100%....they are a little pricey but then again they should be direct bolt in and if it saves a life then its well worth it....some people are going to tell you 0oo0 dont do that its not worth it or its going to look stupid but i could care less...good luck and i hope you and your buddy feel better...sucks for the subie though -------------------- I"M NOT A TOYOTA FAN, IM A FANATIC 1984 accord hatch 5 speed (T-Belt)-Junkyard 1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard 1988 Dodge Aries K (sold) 1969 Chevy El camino - Traded for celica 1991 Dodge Daytona-Traded for Celica 1988 Chevy Camaro-Work in Progress 1989 Ford Mustang LX 5.0 - For Sale 1995 Toyota Celica-Work in Progress |
Aug 30, 2008 - 3:38 PM |
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
^^nice site i see things i want
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
Aug 30, 2008 - 3:56 PM |
|
Enthusiast Joined Mar 29, '07 From Philly Currently Offline Reputation: 11 (100%) |
awesome site...things are a little pricey but then again its alllll quality and its comin from overseas...they have a lot of good **** though and i plan on buyin a lot of things from them
-------------------- I"M NOT A TOYOTA FAN, IM A FANATIC 1984 accord hatch 5 speed (T-Belt)-Junkyard 1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard 1988 Dodge Aries K (sold) 1969 Chevy El camino - Traded for celica 1991 Dodge Daytona-Traded for Celica 1988 Chevy Camaro-Work in Progress 1989 Ford Mustang LX 5.0 - For Sale 1995 Toyota Celica-Work in Progress |
Aug 30, 2008 - 5:21 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
Roll cages are only meant to protect you in case of a roll over.
They wont make your car any more resistant to impact, or protect you any better on the street. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Aug 30, 2008 - 5:28 PM |
|
Enthusiast Joined Mar 29, '07 From Philly Currently Offline Reputation: 11 (100%) |
Roll cages are only meant to protect you in case of a roll over. They wont make your car any more resistant to impact, or protect you any better on the street. this is true...it will help sturdy up the chasis...but its not going to do anything unless you roll your car...i take turns a little fast at times but after what happened to my friend driving STRAIGHT in an s2000...im seriously considering one -------------------- I"M NOT A TOYOTA FAN, IM A FANATIC 1984 accord hatch 5 speed (T-Belt)-Junkyard 1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard 1988 Dodge Aries K (sold) 1969 Chevy El camino - Traded for celica 1991 Dodge Daytona-Traded for Celica 1988 Chevy Camaro-Work in Progress 1989 Ford Mustang LX 5.0 - For Sale 1995 Toyota Celica-Work in Progress |
Aug 30, 2008 - 5:31 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
You need full racing seats, harness and a helmet with a roll cage. If you get into an accident with a roll cage, chances are you'll get more messed up from hitting the cage during impact. -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Aug 31, 2008 - 4:12 AM |
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
You need full racing seats, harness and a helmet with a roll cage. If you get into an accident with a roll cage, chances are you'll get more messed up from hitting the cage during impact. true true......head meets roll cage = x___x -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
Aug 31, 2008 - 12:03 PM |
|
Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
Avoid accidents. That usually works better.
-------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
Aug 31, 2008 - 12:37 PM |
|
Enthusiast Joined Mar 29, '07 From Philly Currently Offline Reputation: 11 (100%) |
Avoid accidents. That usually works better. easier said then done sometimes...thats why the call them accidents and not intentionals This post has been edited by 95st-celica: Aug 31, 2008 - 12:38 PM -------------------- I"M NOT A TOYOTA FAN, IM A FANATIC 1984 accord hatch 5 speed (T-Belt)-Junkyard 1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard 1988 Dodge Aries K (sold) 1969 Chevy El camino - Traded for celica 1991 Dodge Daytona-Traded for Celica 1988 Chevy Camaro-Work in Progress 1989 Ford Mustang LX 5.0 - For Sale 1995 Toyota Celica-Work in Progress |
Aug 31, 2008 - 8:07 PM |
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
the scooby got killed, but he's ok right? he's ok i am looking to do the same thing eventually...unless you get one custom made i dont know of any other places that sell rollcages for our cars but this place: http://www.rhdjapan.com/category-low/TOYOT...ca/Handling/4/3 write them and see if they will fit in a Left-hand drive celica...im pretty sure the 4,5,and 6 points will but im not 100%....they are a little pricey but then again they should be direct bolt in and if it saves a life then its well worth it....some people are going to tell you 0oo0 dont do that its not worth it or its going to look stupid but i could care less...good luck and i hope you and your buddy feel better...sucks for the subie though I will check about about the left handed side too. thanks for the info man. I also don't care what anyone says either, I spent 5 weeks in the hospital and never want to do that again. |
Aug 31, 2008 - 8:12 PM |
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
Avoid accidents. That usually works better. easier said then done sometimes...thats why the call them accidents and not intentionals true, guys I was T-boned by an F150 and my door caved in and bent over my right side and then my seat (i was the passenger) got laid all the way back. It was bad, I saw pics of the car but fortunately I really don't remember getting hit by the truck. I got a concusion and pretty much was passed out. I never saw it coming. So, if the roll cage won't help side impacts, what possibly could? Any custom reinforcement welding you think??? |
Aug 31, 2008 - 9:07 PM |
|
Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
you must also think about added weight
no cage = go kart cage = boat that is if you make it with very sturdy material -------------------- 1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
Aug 31, 2008 - 9:17 PM |
|
Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
I will check about about the left handed side too. thanks for the info man. I also don't care what anyone says either, I spent 5 weeks in the hospital and never want to do that again. a roll cage in a street car will land you up in a hospital for longer than 5 weeks, when you crack your skull on the bars. and Yes a FULL roll cage can help in side impacts. But this is NOT designed for the street and is NOT to be implemented on a street car. Roll cages belong in racecars and not street cars. |
Sep 1, 2008 - 9:03 AM |
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
I will check about about the left handed side too. thanks for the info man. I also don't care what anyone says either, I spent 5 weeks in the hospital and never want to do that again. a roll cage in a street car will land you up in a hospital for longer than 5 weeks, when you crack your skull on the bars. and Yes a FULL roll cage can help in side impacts. But this is NOT designed for the street and is NOT to be implemented on a street car. Roll cages belong in racecars and not street cars. X infinity not to mention any passangers (as you were) -------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
Sep 2, 2008 - 9:43 PM |
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
So, if no roll cage, what can I do about beefing up my sides of the celi for better side impact accidents? Can welding some in-door steel strips help?
|
Sep 2, 2008 - 9:54 PM |
|
Enthusiast Joined Mar 29, '07 From Philly Currently Offline Reputation: 11 (100%) |
true...true....i was thinking more on the rolling part of it....2 very close friends of mine died last christmas in a s2000....had the roll cage come sooner it might have saved their lives....he had it lowerd and it bottomed out going through an intersection...when it came back up the ass end got loose and he spun and rolled clipping a tree and completely riping the whole top of the car off....for an average accident though i could see why it would be more harm then help
-------------------- I"M NOT A TOYOTA FAN, IM A FANATIC 1984 accord hatch 5 speed (T-Belt)-Junkyard 1991 VDUB jetta wolfsburg Ed. 5 speed (clutch)-junkyard 1988 Dodge Aries K (sold) 1969 Chevy El camino - Traded for celica 1991 Dodge Daytona-Traded for Celica 1988 Chevy Camaro-Work in Progress 1989 Ford Mustang LX 5.0 - For Sale 1995 Toyota Celica-Work in Progress |
Sep 2, 2008 - 10:07 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
true...true....i was thinking more on the rolling part of it....2 very close friends of mine died last christmas in a s2000....had the roll cage come sooner it might have saved their lives....he had it lowerd and it bottomed out going through an intersection...when it came back up the ass end got loose and he spun and rolled clipping a tree and completely riping the whole top of the car off....for an average accident though i could see why it would be more harm then help Honestly, the biggest thing you can do is not speed on the Blvd. That is such a terribly designed street that has claimed MANY lives over the years. Yet people still street race up and down it and drive like maniacs from light to light. For a cage to work, you need to be strapped in so that you don't slide out as the car rolls and you need to wear a helmet at all times. Totally pointless on the street since most people find it too much of a hassle to even put on their seat belt. Wear your seat belt, dont ditch your air bag for a cool jdm steering wheel, and drive safer. Those 3 things will do more then some roll cage in the event of an accident. This post has been edited by lagos: Sep 2, 2008 - 10:09 PM -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Sep 2, 2008 - 11:25 PM |
|
Enthusiast Joined Feb 1, '05 From Charlotte NC Currently Offline Reputation: 14 (100%) |
x2 now that i think about it i see why roll cages are not legal in maryland (according to a friend of mine the logic was roll cage=racing therefore illega)l, but bump that! i didnt think about crackin your skull!
-------------------- |
Lo-Fi Version | Time is now: November 29th, 2024 - 10:31 AM |