Can I retrofit a 94 with a cupholder-armrest? |
Can I retrofit a 94 with a cupholder-armrest? |
Dec 1, 2008 - 3:52 AM |
|
Enthusiast Joined Nov 27, '08 From Ramona, CA Currently Offline Reputation: 0 (0%) |
I just bought a used 94 Celica ST (automatic transmission), and discovered that it has no cupholders for that model year. I want to add cupholders. I searched the threads here and saw some people added DIN cupholders to the dash, but I am concerned about condensation dripping onto controls lower down the center console. I am considering other options, such as retrofitting with a later year's armrest cupholder. My transmission is an automatic, so I am not as concerned about the position of the cupholders effecting shifting (like the manual transmission people care about).
My question is, can I just get a later year's cupholder-armrest and simply replace the armrest on the 94's console, or do I need to replace the whole rear center console? I am concerned that the hinge, latch, and/or notches in the rear center console for the years with the cupholder may be different than the 94 without the cupholder. |
Dec 1, 2008 - 7:15 AM |
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
i dont see why not, would you mind posting a pic of your armrest, thats usually where the cupholders are, just to see if its the same
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
Dec 1, 2008 - 10:02 AM |
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
Are you sure you just haven't found your cupholders yet? I know several members had owned their car for a while and an old thread popped up about how crappy the stock cupholders are [Not so bad IMO] and they were surprised to find out they had one. It can be somewhat unnoticeable if you don't know where to look for it.
-------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
Dec 1, 2008 - 11:35 AM |
|
Enthusiast Joined Jan 25, '06 From MN Currently Offline Reputation: 19 (100%) |
If you think the cub holders are bad with the stock shifter try using them with a short shifter like me our cars aren't meant to hold cups anyways lol
-------------------- "To Protect And To Serve The Wealthy" -POLICE
|
Dec 1, 2008 - 11:57 AM |
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
I can still easily shift with the TRD SS and two full sized Whataburger drinks in the cup holders [which requires the holder to be all the way out and the front most drink you have to take a sip of it cause it will be leaning forward a few degrees] - granted my arm is in a weird position but I'm used to it. It's really not all that difficult to learn - I've seen much worse.
This post has been edited by DEATH: Dec 1, 2008 - 11:58 AM -------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
Dec 1, 2008 - 12:22 PM |
|
Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
It's careful execution of what I like to refer to as "The Crane Maneuver" that results in successful shifting with the cup holders in use.
Look harder - I bet you have cup holders. Unless someone took them out for some reason, or you don't have the stock arm rest. -------------------- |
Dec 1, 2008 - 12:33 PM |
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
It's careful execution of what I like to refer to as "The Crane Maneuver" that results in successful shifting with the cup holders in use. Look harder - I bet you have cup holders. Unless someone took them out for some reason, or you don't have the stock arm rest. Totally - use the crane technique Daniel-San If someone did take your cupholders out [Which I can see cause they do wear out and tend to slide everytime you brake or launch - can be easily fixed but I can see someone taking them out] you can easily find one here from someone who is parting a car or from your local junkyard. Beyond that, anything you do would be custom and completely up to your imagination and fabrication skills. I recently added a larger cupholder right behind the armrest on the hump between the rear floorboards. All it took was 15mins with a dremil to shape the storebought cupholder to fit the center console's contours and a few more mins to screw it in place securely - works great for those giganto drink that don't have the bottom of the cup diameter reduced. My guess is still with you just not having found your's yet tho - take another look -------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
Dec 1, 2008 - 8:07 PM |
|
Enthusiast Joined Feb 28, '07 Currently Offline Reputation: 1 (100%) |
u have cup holders they are underneath the center console..i have a 94 st and i have cupholders ...
This post has been edited by CelicaST_CALI: Dec 2, 2008 - 7:44 PM -------------------- BANNED. for life, you moron.
|
Dec 2, 2008 - 6:10 PM |
|
Enthusiast Joined May 16, '05 From Toronto, Ontario Currently Offline Reputation: 8 (100%) |
Which I can see cause they do wear out and tend to slide everytime you brake or launch - can be easily fixed but I can see someone taking them out] how do u fix it? -------------------- |
Dec 2, 2008 - 6:39 PM |
|
Enthusiast Joined Feb 7, '07 From Portland, Oregon Currently Offline Reputation: 67 (96%) |
Open the ash tray and use it as a cell phone holder. The open lid will stop the cup holder from sliding if you have a cup in it. If you don't, but it still slides, black electrical tape is not only practical AND alluring, it adds 10 HP!
-------------------- |
Dec 2, 2008 - 6:52 PM |
|
Enthusiast Joined Feb 6, '08 From Oregon Currently Offline Reputation: 8 (100%) |
I recently added a larger cupholder right behind the armrest on the hump between the rear floorboards. All it took was 15mins with a dremil to shape the storebought cupholder to fit the center console's contours and a few more mins to screw it in place securely - works great for those giganto drink that don't have the bottom of the cup diameter reduced. Pics or it didnt happen i wanna see this -------------------- 1 JL 1,000/1v2
2 JL 12" W6v2 2 Focal 6.5 component 165a1 Kenwood DDX512 head unit Running 142.6db with the back seat up:) |
Dec 2, 2008 - 9:49 PM |
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Open the ash tray and use it as a cell phone holder. The open lid will stop the cup holder from sliding if you have a cup in it. If you don't, but it still slides, black electrical tape is not only practical AND alluring, it adds 10 HP! I need to do this to my already working cup holder! Free HP -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
Dec 3, 2008 - 11:28 AM |
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
I recently added a larger cupholder right behind the armrest on the hump between the rear floorboards. All it took was 15mins with a dremil to shape the storebought cupholder to fit the center console's contours and a few more mins to screw it in place securely - works great for those giganto drink that don't have the bottom of the cup diameter reduced. Pics or it didnt happen i wanna see this IDKY the camera's flash always makes every black look a different color - everything look normal in natural light [For the most part anyway] Nothing fancy - but infinitely useful for those big fast food drinks and as you can see I toss my change in there as well which is also convenient in the drive-thru. Looks stockish enough for me. [Yes I know I need to vacuum] -------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
Dec 3, 2008 - 12:43 PM |
|
Enthusiast Joined Feb 6, '08 From Oregon Currently Offline Reputation: 8 (100%) |
that looks so good:) even though the car is messy lol
-------------------- 1 JL 1,000/1v2
2 JL 12" W6v2 2 Focal 6.5 component 165a1 Kenwood DDX512 head unit Running 142.6db with the back seat up:) |
Dec 3, 2008 - 2:09 PM |
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
It's only right there - my dog like to go for rides but she sheds and she sits right there. I'm just glad she's not one of those smelly dogs - she wouldn't be getting a ride if she was.
Guess OP found his cupholders This post has been edited by DEATH: Dec 3, 2008 - 2:11 PM -------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
Dec 3, 2008 - 2:17 PM |
|
Enthusiast Joined Jan 18, '08 From Houston Currently Offline Reputation: 7 (100%) |
May i add that regardless of the messy car, and the HUMONGOUS chiwawa animal, That the cupholder itself looks pretty good. I've seen it first hand, and it's got such an OEM quality to it, that it had to be pointed out to me when i was already back there.
-------------------- QUOTE (presure2 @ Nov 6, 2010 - 6:16 AM) Via FB: fcuking awsome!!! D-man FTW! Damn D-Man - most impressive. D-Man's post should be a sticky LOL, oh boy, you can always count on D-Man for ridiculously hilarious posts. |
Dec 4, 2008 - 2:58 AM |
|
Enthusiast Joined Nov 27, '08 From Ramona, CA Currently Offline Reputation: 0 (0%) |
I examined my armrest more carefully, and it is apparent that the cupholder tray has been removed. I'm guessing the previous owner broke it and just removed it. I'm going to replace it. I already found a source.
|
Lo-Fi Version | Time is now: December 10th, 2024 - 9:15 AM |