Engine Pics!, Post some photos of your engines! Options

[95st-celica]

Pop the valve cover off it now. Im dying to see how it looks after all these years of boosting.

X2

x3

this is my 3s after 44k from the factory





This post has been edited by 95st-celica: Dec 25, 2008 - 5:21 PM

[hatchy_gt-s]

minus the dirty cam shafts mines not to shabby



This post has been edited by hatchy_gt-s: Dec 27, 2008 - 12:11 PM

[njccmd2002]

let the dirty show off

[Cuts_the_Pilot]

thought ide do a quick update, bit of autosol and elboy grease goes a long way apparently.

[RickJamesBish]

That does look good...I'm growing more and more jealous of GT-4's every day.

[presure2]

QUOTE (jcbass7 @ Dec 25, 2008 - 1:43 PM) QUOTE (lagos @ Dec 25, 2008 - 1:00 PM) Pop the valve cover off it now. Im dying to see how it looks after all these years of boosting.


X2


x3

i will, when i install the cams.

njccmd2002Posted Yesterday, 12:17 PM let the dirty show off

lol thats not too bad....THIS is dirty. its my old motor that i pulled when i installed arts, it had ~150k on it, and was ABUSED, big time. pics like this are why you should always change your oil at regular intervals, and shows what happens when you dont

[jordisonjr]

My ex celica engine... Gonna miss that badboy

Is that strut bar just painted red?

[azian_advanced]

SS-II's and SS-III's that came with the Beams engine got the red strut bar from the factory.

This post has been edited by azian_advanced: Jan 24, 2009 - 7:20 PM

[Batman722]

Gerald, when are you going to just swap your car ? Beams or 3rd gen 3s, get it done, you need it.

[gokarter]

Here's mine, but i would really want to fix it up a bit as my cai looks so out of place being so shiny.

[Rusty]

^ that intake pipe looks tidy, doesn't flex at all does it?

[gokarter]

It doesnt flex or move around much but as can be seen is flexible enough to be bent into position, a cheap pipe to only 30 bucks and runs right down to the pod fliter that sits in the inear guard just behind fog light.

[KAOS]

It doesnt flex or move around much but as can be seen is flexible enough to be bent into position, a cheap pipe to only 30 bucks and runs right down to the pod fliter that sits in the inear guard just behind fog light.

.. .excellent I was going to ask where you placed the filter... nice job.

[azian_advanced]

Gerald, when are you going to just swap your car ? Beams or 3rd gen 3s, get it done, you need it.

Dustin i've done my research for a 3rd gen 3sgte swap a long time ago .. and i've been wanting to do this for a while now except deep inside something is telling me to be patient and get an awd-turbo car all together. i'm still working on that one...

This post has been edited by azian_advanced: Jan 30, 2009 - 12:00 PM

[DEATH]

Gerald, when are you going to just swap your car ? Beams or 3rd gen 3s, get it done, you need it.

Dustin i've done my research for a 3rd gen 3sgte swap a long time ago .. and i've been wanting to do this for a while now except deep inside something is telling me to be patient and get an awd-turbo car all together. i'm still working on that one...

F-that - D's right. Swap to 3rdgen or BEAMS [+turbo]

This post has been edited by DEATH: Feb 2, 2009 - 3:13 AM

[stephen_lee]

My dirty engine





my other engine

[lagos]

Looks like someone ran out of oil.

[TRD_Ian]

thats a speed hole in your block right? helps increase cooling?

[Hafkai]

[stephen_lee]

Looks like someone ran out of oil.

i think the pump went out, i actually had oil. but then, i knew it was going to blow soon anyway. it had the "death knock" when you first start it.

thats a speed hole in your block right? helps increase cooling?

haha YEAH! actually drove it ~25 more miles like that. W/O over heating

i like that paint scheme. the black/grey