WTB: Projector Corner/Side Bulb housing/connector Options

[Fastbird]

The replacement projector I bought didn't come with the side/accent bulb, and mine was destroyed in the accident. Looking for a good condition bulb housing for sure, connectors (a pair if possible) for the wiring if anyone has them.

Or, if anyone has a part number, I could use that too.

[Random_Stranger]

The replacement projector I bought didn't come with the side/accent bulb, and mine was destroyed in the accident. Looking for a good condition bulb housing for sure, connectors (a pair if possible) for the wiring if anyone has them.

Or, if anyone has a part number, I could use that too.

I have a spare one from my projector that has the tabs broken. I dunno what it would go for though? If you can get the part cheap, then great. If not, then come see me. I don't want to overcharge, but keep in mind, this is taking away from a projector that can be fixed as well. Wait! Couldn't you just get any 194 bulb? Or is it the whole entire piece? I am talking about the piece and not the bulb. If it is just the bulb, shoot. 194 will do the trick.

[trdproven]

you can buy the whole harness at a reg. parts store thats what I did I didn't even use the factory bulb and harness. The one I bought just twists on like factory.

[Fastbird]

I have a spare one from my projector that has the tabs broken. I dunno what it would go for though? If you can get the part cheap, then great. If not, then come see me. I don't want to overcharge, but keep in mind, this is taking away from a projector that can be fixed as well. Wait! Couldn't you just get any 194 bulb? Or is it the whole entire piece? I am talking about the piece and not the bulb. If it is just the bulb, shoot. 194 will do the trick.

I need the connector piece, the bulb I can get anywhere. Which tabs are broken??? Does it still secure into the housing just fine??

Anyone got a part number?

[Random_Stranger]

I have a spare one from my projector that has the tabs broken. I dunno what it would go for though? If you can get the part cheap, then great. If not, then come see me. I don't want to overcharge, but keep in mind, this is taking away from a projector that can be fixed as well. Wait! Couldn't you just get any 194 bulb? Or is it the whole entire piece? I am talking about the piece and not the bulb. If it is just the bulb, shoot. 194 will do the trick.

I need the connector piece, the bulb I can get anywhere. Which tabs are broken??? Does it still secure into the housing just fine??

Anyone got a part number?

Well there is a small scratch on the glass project that should be buffed out and the tabs need to be like welded into the back housing of the projector. Oh, you know what? The part that secures it into the fender is missing too. I had hit something and it got my fender and that projector pretty good, but no cracks. I am not really trying to get rid of my projector, but keep it as back up for any parts I could use or sell from it. Like ballast or something, I dunno.

[Fastbird]

I have a spare one from my projector that has the tabs broken. I dunno what it would go for though? If you can get the part cheap, then great. If not, then come see me. I don't want to overcharge, but keep in mind, this is taking away from a projector that can be fixed as well. Wait! Couldn't you just get any 194 bulb? Or is it the whole entire piece? I am talking about the piece and not the bulb. If it is just the bulb, shoot. 194 will do the trick.

I need the connector piece, the bulb I can get anywhere. Which tabs are broken??? Does it still secure into the housing just fine??

Anyone got a part number?

Well there is a small scratch on the glass project that should be buffed out and the tabs need to be like welded into the back housing of the projector. Oh, you know what? The part that secures it into the fender is missing too. I had hit something and it got my fender and that projector pretty good, but no cracks. I am not really trying to get rid of my projector, but keep it as back up for any parts I could use or sell from it. Like ballast or something, I dunno.

I don't think we're on the same page here. All I'm looking for is the little housing for the little side accent bulb that goes in the outer upper corner of each projector housing.

[Fastbird]

GOT IT!!!! Through the ToyoDIY website, finally figured the right drill down sequence to hit the SSIII stuff and find the projectors. The part number for the "clearance lamp" sockets (as they're called) is 99159-10228. At various places on line they're showing at about $5.75ish each.

Just an FYI.

[Random_Stranger]

I have a spare one from my projector that has the tabs broken. I dunno what it would go for though? If you can get the part cheap, then great. If not, then come see me. I don't want to overcharge, but keep in mind, this is taking away from a projector that can be fixed as well. Wait! Couldn't you just get any 194 bulb? Or is it the whole entire piece? I am talking about the piece and not the bulb. If it is just the bulb, shoot. 194 will do the trick.

I need the connector piece, the bulb I can get anywhere. Which tabs are broken??? Does it still secure into the housing just fine??

Anyone got a part number?

Well there is a small scratch on the glass project that should be buffed out and the tabs need to be like welded into the back housing of the projector. Oh, you know what? The part that secures it into the fender is missing too. I had hit something and it got my fender and that projector pretty good, but no cracks. I am not really trying to get rid of my projector, but keep it as back up for any parts I could use or sell from it. Like ballast or something, I dunno.

I don't think we're on the same page here. All I'm looking for is the little housing for the little side accent bulb that goes in the outer upper corner of each projector housing.

Yeah I know, but then you asked about tabs dealing with the WHOLE projector. I am glad you found the piece though! WOOHOOO! I am still kinda shocked yours didn't come with it though, but for that price, you can't beat that with a baseball bat.

[Fastbird]

I have a spare one from my projector that has the tabs broken. I dunno what it would go for though? If you can get the part cheap, then great. If not, then come see me. I don't want to overcharge, but keep in mind, this is taking away from a projector that can be fixed as well. Wait! Couldn't you just get any 194 bulb? Or is it the whole entire piece? I am talking about the piece and not the bulb. If it is just the bulb, shoot. 194 will do the trick.

I need the connector piece, the bulb I can get anywhere. Which tabs are broken??? Does it still secure into the housing just fine??

Anyone got a part number?

Well there is a small scratch on the glass project that should be buffed out and the tabs need to be like welded into the back housing of the projector. Oh, you know what? The part that secures it into the fender is missing too. I had hit something and it got my fender and that projector pretty good, but no cracks. I am not really trying to get rid of my projector, but keep it as back up for any parts I could use or sell from it. Like ballast or something, I dunno.

I don't think we're on the same page here. All I'm looking for is the little housing for the little side accent bulb that goes in the outer upper corner of each projector housing.

Yeah I know, but then you asked about tabs dealing with the WHOLE projector. I am glad you found the piece though! WOOHOOO! I am still kinda shocked yours didn't come with it though, but for that price, you can't beat that with a baseball bat.

Well being used for the one I bought, I honestly didn't even think about it. Live and learn I guess.