couple of vids of my 7AFTE Options

[FunkySR]

[hurley97]

Nice Jay, the car sounds awesome! I wish I could find a tunnel like that to take a video of mine.

[FunkySR]

you Know Steff, I still havent linked my o2 but I still get 14's and low 15 AFR on cruise. Want me to email you my map..you might like it.

[hurley97]

Same here. I got an external wastegate in hopes of keeping my boost around 10psi and not creeping to 15. Yeah you can e-mail me your map, I'd like to see the differences from mine. My map could be a lot better since I don't really have time to ride around with someone and tune, I kinda do it by myself while I'm driving which is not really the best idea... haha

[lagos]

cool vid!

[aznpnoiboi55]

nice

[cheela]

sweet!!!

[FunkySR]

Same here. I got an external wastegate in hopes of keeping my boost around 10psi and not creeping to 15. Yeah you can e-mail me your map, I'd like to see the differences from mine. My map could be a lot better since I don't really have time to ride around with someone and tune, I kinda do it by myself while I'm driving which is not really the best idea... haha

same here dont worry. I also do the same..then fine tune offline at home in front of the tele.

[hurley97]

haha yea I do that sometimes. Do you use the logger? It just puts everything in a big list of numbers, AEM does have a program that deciphers the numbers into a visual graph but I haven't spent enough time with it to really understand how to set it up so it makes any sense.

[FunkySR]

no the logger is too complicated for my simple mind. ha ha. used it a few times when i was setting up...but now i know where i am i dont bother. will reply to youyr pm now

[FunkySR]

i'll take a better vid of the boost guage and speedo tonight and post.

[FunkySR]

here you go steff...i think u can get view of the boost gauge a bit better here





pls email me jdridesmail@gmail.com and I will reply with a copy of my map for you.

[hurley97]

Nice! I like how you stay in the higher 10's afr, I think mine goes too rich sometimes, like 10.1:1

[FunkySR]

yeh. I will try and get you one on cruise....it stays dead on 14.7 without O2 map. I dont think we need to hook it up. One problem I have though, the AEM editing screen shows the rpm jumping all over the place...no matter how many times i calibrate. Not too bothered as the car is working. Did you wore your crank signals different to me?

hope you got my email.

[Batman722]

looks quick, nice vid

[Daftboy]

i like your headunit ...i have the same one.

[NGHTKD]

sounds really nice. good work!!!

[hurley97]

yeh. I will try and get you one on cruise....it stays dead on 14.7 without O2 map. I dont think we need to hook it up. One problem I have though, the AEM editing screen shows the rpm jumping all over the place...no matter how many times i calibrate. Not too bothered as the car is working. Did you wore your crank signals different to me?

hope you got my email.

yeah I got your e-mail. Yeah the positive crank wire I cut and connected like they say, on the negative side I only tapped the input wire.

I think I have a similar problem though, I can't get the TPS signal to work properly, it's hooked up right and I tested the connection, it just won't read anything in the gauge window. Maybe the same sort of interference issue?

I think I might hook up the O2 and try to play with it, I feel like my ECU sort of fights with the F/IC sometimes, I don't know how that's going to work out though.

[FunkySR]

Hey Stef. Just saw this. My TPS seems ok....but i still get the 'locator' jumping to the high RPM's and load when i'm not actually there. if that makes sense. I took all the wiring apart, and made sure that the crank wires were as close to their sheath as possible. that cuts interferance.