FS: Parting Out 5SFE engine, CHEAP PARTS! everything must go! Options

[6strngs]

Title says it all. I have a blown 5sfe that I'm parting out. The bottom end is blown due to metal shards getting into it and chewing up the pistons and cylinder walls. It's probably still rebuildable since the gouges weren't that deep, you'd just have to go with .020 or .040 oversize pistons ande overbore it. I'll let the bottom end go for cheap. The top end is still in good shape. Though I'd recommend rebuilding it before using it since it's got 162K on it. I have manifolds, etc. let me know what you need and I'll let you know what I've got.

At this time, I'm just selling the engine parts. I may have some other parts that I need to get rid of too. if I do, I'll post them here. Here's just a few of the parts:

5sfe intake manifold

5sfe stock exhaust manifold w/ heat sheilds

5sfe bottom end, block, crank, pistons, rods - $20 picked up, expect a high-ish shipping charge

5sfe head worked good on my car, has 162K on it. no cams. $35 + ship!!!

stock alternator, dirty but works good

brackets, for PS pump, Alternator, passenger side axle, etc.

valve cover, good condition, not painted

OBD1 (94-95) Manual transmission wiring harnesses. I have one california spec, and one federal spec. both are 98% complete. AFAIK they are both only missing one connector each. they may also be missing the rubber boot where it goes into the firewall. $50 each + shipping

Make an offer on anything! I'll let stuff go cheap to clear my garage. I especially want the engine itself out. Let me know what you need, I've most likely got it if it relates to the engine.

This post has been edited by 6strngs: Mar 10, 2009 - 8:38 PM