4wd on a 2wd dyno..., can?.. |
4wd on a 2wd dyno..., can?.. |
Aug 12, 2009 - 8:27 AM |
|
Enthusiast Joined Apr 14, '08 From Paraguay Currently Offline Reputation: 0 (0%) |
Hi everybody.... I'm from Paraguay and I have a ST205 JDM, and a friend of mine have a CALDINA ST215W (3sgte gen 4)...
Is it possible to raise the back of the car and just have the front wheels on the dyno. Do the gearbox brake apart or what??... Is the dyno test on the F-wheels accurate yet??... The reason I am asking is because here in my country we don't have a 4wd dyno.. Grettings... thanks in advance... -------------------- No se sabe de lo que se es capaz hasta que se intenta... ;) |
Aug 12, 2009 - 3:06 PM |
|
Enthusiast Joined Sep 22, '08 From Bergenfield Currently Offline Reputation: 5 (78%) |
I cant say for sure as I havent actually tried it, BUT I would say with a fair bit of certainty that you will not get an accurate reading as the power is equally split from the front wheels to the rear wheels.
Also, I highly doubt you would find a dyno operator willing to let you use there X0,000 dyno in such a fashion. It would be EXTREMELY dangerous. Have you seen a car run on the dyno? I will guess that you havent, as then you would have never asked this question. The car gets strapped down, so I cant see how you would successfully get the rear (or the front) securely up in there air. Next, if you are able to secure the car enough safely to get is strapped to the rollers.....have you ever seen what a car does after you have completed the run, and let the gas out?.....I bucks, and it bucks HARD. Enough to knock the car off whatever rigging you made up to hold the other end of the car up with. Like I said before, I cant see a dyno operator letting you take this chance on his X0,000$ machine. Think of the damage you would cause if the car fell off the rigging you made at the end of a third gear run......you rear wheels are spinning at over 100mph....and a 4th gear pull pshhh, forget it. You are looking at 130+ It is VERY unsafe, and I would look harder for an AWD dyno. Even if that means taking a vacation for a week and bringing your cars with you. There has to be an AWD dyno somewhere in Brazil, Argentina or Bolivia. GL. --------------------
|
Aug 12, 2009 - 4:49 PM |
|
Enthusiast Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
I'm not sure if the ST205 has this, but the ST185 had a bolt / screw on the tranny where you can make the car run on the front wheels only for dyno runs.
hopefully one of the europe / asia members can clarify if the ST205 came with this option as well -------------------- |
Aug 12, 2009 - 5:53 PM |
|
Enthusiast Joined Dec 15, '02 From Tasmania(Australia) Currently Offline Reputation: 0 (0%) |
^^^no gtfours above 185 have them^^^
You could strap the front down and have the arse in the air...but in my opinion..its dangerous...hard on your transfer case and doesnt give a good reading. go find an awd dyno...a pain i know but worth it. This post has been edited by Cuts_the_Pilot: Aug 13, 2009 - 2:46 AM -------------------- ST205 Group A Rallye GT-Four, #61 of 77............600hp GT3582r
GRX133 Toyota Mark X 350s |
Aug 12, 2009 - 11:25 PM |
|
Enthusiast Joined Apr 14, '08 From Paraguay Currently Offline Reputation: 0 (0%) |
Thanks people...
In first place, I make the question just to know.... and yes, I always see car running in a dyno and I know how dangerous it is... But, thanks for your reply guys... So, only in the street to tune the ecu by the moment... and in the future, who's now if I do a travel to Sao Paulo... there they have a awd dyno.. Grettings... -------------------- No se sabe de lo que se es capaz hasta que se intenta... ;) |
Aug 13, 2009 - 9:14 PM |
|
Enthusiast Joined Oct 11, '06 From calgary Currently Offline Reputation: 5 (100%) |
give the iphone software, Dinolicous a try. Under right conditions its not bad.
|
Aug 14, 2009 - 8:20 AM |
|
Enthusiast Joined Mar 22, '07 From Houston, TX Currently Offline Reputation: 4 (100%) |
give the iphone software, Dinolicous a try. Under right conditions its not bad. Cause there's an app for that! LOL That's pathetic. -------------------- QUOTE "And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH 1994 GT: V6 swap, 5speed E53 W/ LSD, All Power, now RED 1995 ST: SOLD @273k miles, Auto, all power, CarPC, White 1994 ST: Totaled, 5spd, all power, Red RIP 07/09/09 @ 241,810 1994 Lexus LS400: This is my new DD |
Aug 14, 2009 - 8:33 AM |
|
Enthusiast Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
I have played with dynolicoues and is pretty good for what it is, but when Tuning a car it will do NO GOOD, dynolicuos is great for getting and HP estimate, 0 - 60 times 60-0 tiomes, measuring G force while driving ( my favorite part ) but it doesn't monitor air : fuel, boost pressure, and other, so in a sence street tuning is the way to go for him, after he gets the air : fuel where he wants it ( using a wideband ) at a set boost level, he can use dynolicous to get an estimate of how much power he is making,
-------------------- |
Aug 15, 2009 - 8:39 PM |
|
Enthusiast Joined May 29, '09 From Burlington, NC Currently Offline Reputation: 0 (0%) |
Hi everybody.... I'm from Paraguay and I have a ST205 JDM, and a friend of mine have a CALDINA ST215W (3sgte gen 4)... There's GT-4's in Paraguay??? Man, I hate the US!!! Is it possible to raise the back of the car and just have the front wheels on the dyno. Do the gearbox brake apart or what??... Is the dyno test on the F-wheels accurate yet??... The reason I am asking is because here in my country we don't have a 4wd dyno.. Grettings... thanks in advance... -------------------- wow . teespring.com/savethemanual
|
Aug 16, 2009 - 2:59 PM |
|
Enthusiast Joined Apr 14, '08 From Paraguay Currently Offline Reputation: 0 (0%) |
There's GT-4's in Paraguay??? Man, I hate the US!!! Why the discrimination???... here we have a lot of gt-four ST205... only 2 o 3 europe version in all the country (one used for rally, it's an authentic group A), but the rest are JDM with RHD to LHD conversion... Here a photo of mine... By miguelst205, shot with 5610d-1 at 2009-08-16 -------------------- No se sabe de lo que se es capaz hasta que se intenta... ;) |
Aug 19, 2009 - 5:29 AM |
|
Enthusiast Joined Jun 25, '06 From Box Elder, South Dakota Currently Offline Reputation: 2 (100%) |
He could also use the apexi RSM with g-sensor. Just an idea though, and about on the same level as the Ipod. Anywho, just go find that dyno man and show us the numbers ^_^ , and Good luck. Oh and your car is VERY NICE.
-------------------- (\__/)
(='.'=) This is bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. |
Lo-Fi Version | Time is now: November 27th, 2024 - 12:48 PM |