6G Celicas Forums

Welcome Guest ( Log In | Register )

2 Pages V  < 1 2  
Reply to this topicStart new topic
> Your experience with LED bulbs?
post Aug 26, 2009 - 10:47 AM
+Quote Post
Hezz

Enthusiast

Joined Jul 25, '09
From Basin City, WA
Currently Offline

Reputation: 0 (0%)




I've had the superbrightleds.com 5 way white 194 in my gauge cluster for a month now. They are bright but not shocking, and they do dim fine so far.
post Aug 28, 2009 - 11:44 PM
+Quote Post
2bcelica



Enthusiast
***
Joined Mar 22, '07
From Murphy, TX
Currently Offline

Reputation: 5 (100%)




I just replaced my cluster bulbs with White HP5 LEDs from superbrightleds.com

Here is a photo and video of how they look. I think I might get two more that are bighter then these to replace the left and right gauge. The middle is bright enough.





post Sep 1, 2009 - 8:34 AM
+Quote Post
samir0189



Enthusiast
****
Joined Mar 8, '08
From Orlando, Florida
Currently Offline

Reputation: 14 (100%)




^^ 2bcelica, Are you sure the right and left gauges are even lighting? I think LEDs can only go in one way (polarity?), and maybe if you installed those two backwards, they are not lighting at all, and the two side gauges are being lit only by the indirect light from the center 194.

Reverse the bulbs in the socket and check! I dont understand how the bulbs can be the same and receiving the same power and light so poorly.

You can switch it around and plug in the harnesses and see if they light before you bolt it back in the dash.

This post has been edited by samir0189: Sep 1, 2009 - 8:41 AM


--------------------
My F/S Thread!

QUOTE
(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.

QUOTE
Ferdi says (11:29)
No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.
post Sep 1, 2009 - 9:02 AM
+Quote Post
95CelicaST



Enthusiast
*****
Joined Feb 5, '05
From pineapple under the sea
Currently Offline

Reputation: 9 (100%)




I purchased mine from http://www.autolumination.com and they've been great. I've had them in for a couple months now without a reduction in light quality, and I've used my dimmer often with no ill effects.


--------------------
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money

I'm not really an asshole, but I play one on the internet.
**** Photobucket
post Sep 1, 2009 - 9:06 AM
+Quote Post
2bcelica



Enthusiast
***
Joined Mar 22, '07
From Murphy, TX
Currently Offline

Reputation: 5 (100%)




QUOTE (samir0189 @ Sep 1, 2009 - 2:34 PM) *
^^ 2bcelica, Are you sure the right and left gauges are even lighting? I think LEDs can only go in one way (polarity?), and maybe if you installed those two backwards, they are not lighting at all, and the two side gauges are being lit only by the indirect light from the center 194.

Reverse the bulbs in the socket and check! I dont understand how the bulbs can be the same and receiving the same power and light so poorly.

You can switch it around and plug in the harnesses and see if they light before you bolt it back in the dash.


Yep, Checked and triple checked - before putting things back in - all three bulbs lite up, but doesn't come through very well on the beams gauge I guess, so might need more LED's on those other two bulbs
post Sep 1, 2009 - 9:31 AM
+Quote Post
samir0189



Enthusiast
****
Joined Mar 8, '08
From Orlando, Florida
Currently Offline

Reputation: 14 (100%)




mann that sucks.

and 95celicast, $9/bulb is CRAZZZZYYYY! Are they worth that? lol.


--------------------
My F/S Thread!

QUOTE
(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.

QUOTE
Ferdi says (11:29)
No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.
post Sep 1, 2009 - 11:08 AM
+Quote Post
95CelicaST



Enthusiast
*****
Joined Feb 5, '05
From pineapple under the sea
Currently Offline

Reputation: 9 (100%)




Is it worth buying once and not worrying about it for a long time? Yes.

The 5LED matrix bulbs are what I have. They're $7 each. A hefty price? Maybe, but they're non-polar lights and they work well, hands down. I had them in my last gauge cluster (swapped between two Celicas) for way over a year and had zero problems, and if I hadn't sold the car I bet they would still be working fine.


--------------------
1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money

I'm not really an asshole, but I play one on the internet.
**** Photobucket
post Sep 5, 2009 - 10:03 PM
+Quote Post
ChfNix



Enthusiast
**
Joined Aug 12, '09
From Orange Beach, Alabama
Currently Offline

Reputation: 6 (100%)




Hey, I ordered some of the ones from superbrightleds.com, and they look amazing!! They were $5.95 apiece, but I think $18 is a fair price to pay for as good as they look!! However one of them didn't work, so we'll see how their customer service is...


--------------------
Failing to prepare is preparing to fail!
post Sep 6, 2009 - 10:37 PM
+Quote Post
ChfNix



Enthusiast
**
Joined Aug 12, '09
From Orange Beach, Alabama
Currently Offline

Reputation: 6 (100%)




So here is a pic of my gauges with the superbrightleds.com LED's installed on the left and center and a aftermarket "blue" 194 bulb on the right, look at the difference!!!


This post has been edited by ChfNix: Oct 11, 2009 - 11:41 AM


--------------------
Failing to prepare is preparing to fail!
post Sep 15, 2009 - 12:26 AM
+Quote Post
ChfNix



Enthusiast
**
Joined Aug 12, '09
From Orange Beach, Alabama
Currently Offline

Reputation: 6 (100%)




So here it is, I think the color I chose for the clock is still to dark, I think I'm gonna go one brighter...


This post has been edited by ChfNix: Oct 11, 2009 - 11:43 AM


--------------------
Failing to prepare is preparing to fail!

2 Pages V  < 1 2
Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 29th, 2024 - 4:55 PM