FS:eBrake Boot, Shift Boot & armrest cover ready 2 ship, Details on page 1 & last page, make to order!! Options

[vincent_doggy]

Hey Vince, it sounds and looks like you do great work!!! I am interested in a black with red stitching shift boot (for a short throw shifter), e-brake boot, and arm rest cover, is that available?
Plus the narrow o-ring for the TRD shifter?

Yea, take few days to produce once payment receive, since the short boot need to custom order

Paypal: vincent_doggy@hotmail.com

USD$100 for 3 shipped

Pls choose personal, then GIFT

remark your screen name, your order and postal address

[ChfNix]

Hey Vince, it sounds and looks like you do great work!!! I am interested in a black with red stitching shift boot (for a short throw shifter), e-brake boot, and arm rest cover, is that available?
Plus the narrow o-ring for the TRD shifter?

Yea, take few days to produce once payment receive, since the short boot need to custom order

Paypal: vincent_doggy@hotmail.com

USD$100 for 3 shipped

Pls choose personal, then GIFT

remark your screen name, your order and postal address

Money sent!!

[RoyO]

Shift boot combo installed, looks very good!
Perfect fitment

[vincent_doggy]

Hey Vince, it sounds and looks like you do great work!!! I am interested in a black with red stitching shift boot (for a short throw shifter), e-brake boot, and arm rest cover, is that available?
Plus the narrow o-ring for the TRD shifter?

Yea, take few days to produce once payment receive, since the short boot need to custom order

Paypal: vincent_doggy@hotmail.com

USD$100 for 3 shipped

Pls choose personal, then GIFT

remark your screen name, your order and postal address

Money sent!!

Got the payment and will let u know once ship

Shift boot combo installed, looks very good!
Perfect fitment

looking good, but is the armrest cover well mounted already?

[ChfNix]

Thanks Vince!! Looks like it will be leaving Hong Kong tomorrow, I will install, leave feedback, take, and post pics as soon as I get them. I cant wait, I got my quick shift kit yesterday!!!

[ChfNix]

Alright, so I got my short shifter boot from Hong Kong a few weeks ago. I tried to put it in my car a week ago and the fitment is not so good. The metal ring is not wide enough. After I try to insert the ring in the four little little slots, it is not snug enough. The boot shifts around when I move the shifter and the boot eventually falls down through the shifter hole. This is very easy to install, but it is just not fitting well enough.

I should not have to modify this either since I paid for it! HELP!

I have the same problem with mine. I tried pulling the metal square out wider to hold on better, but boy, that metal sure holds it shape well. I must have done something though, because it is holding better and hasn't fallen out since.

sorry guys, I would ask the shop to aware the width of the metal ring

Celicav, I believe that metal are flexible and feasable to bend and still holds its shape well.

1 question, since the upper plastic ring are same as stock, do u mean the upper part can't stop the boot falling down or?

No, no, I should not have said "ring". I'm talking about bottom, rectangular part. The metal frame is not wide enough. The stitching is snug and tight around the frame, and bending it up is not going to do the job. Please allow me send it back! I will exchange if you promise me u can get one that fits. I guess you just got a out of spec set of these things from the shop. I realize mistakes happen, but I would appreciate an exchange for one that is correct or a refund. Thanks!

Celicav, mind to post a pics here or PM me the pics

I would make another one for ya, keep the defective one and no need to send that one back to me.

Mind to paypal me $5 bucks to cover the mailing cost?

Relax and be patience, will let ya know once ship!!

But I need pics, just be fair to me, ok?

Vince

That is fair. I will take some pics today. I know exactly the pics to take that will make the defect clear to you. Thanks!

just got mine, and I have the same problem, I will try to fix it though...

[vincent_doggy]

Alright, so I got my short shifter boot from Hong Kong a few weeks ago. I tried to put it in my car a week ago and the fitment is not so good. The metal ring is not wide enough. After I try to insert the ring in the four little little slots, it is not snug enough. The boot shifts around when I move the shifter and the boot eventually falls down through the shifter hole. This is very easy to install, but it is just not fitting well enough.

I should not have to modify this either since I paid for it! HELP!

I have the same problem with mine. I tried pulling the metal square out wider to hold on better, but boy, that metal sure holds it shape well. I must have done something though, because it is holding better and hasn't fallen out since.

sorry guys, I would ask the shop to aware the width of the metal ring

Celicav, I believe that metal are flexible and feasable to bend and still holds its shape well.

1 question, since the upper plastic ring are same as stock, do u mean the upper part can't stop the boot falling down or?

No, no, I should not have said "ring". I'm talking about bottom, rectangular part. The metal frame is not wide enough. The stitching is snug and tight around the frame, and bending it up is not going to do the job. Please allow me send it back! I will exchange if you promise me u can get one that fits. I guess you just got a out of spec set of these things from the shop. I realize mistakes happen, but I would appreciate an exchange for one that is correct or a refund. Thanks!

Celicav, mind to post a pics here or PM me the pics

I would make another one for ya, keep the defective one and no need to send that one back to me.

Mind to paypal me $5 bucks to cover the mailing cost?

Relax and be patience, will let ya know once ship!!

But I need pics, just be fair to me, ok?

Vince

That is fair. I will take some pics today. I know exactly the pics to take that will make the defect clear to you. Thanks!

just got mine, and I have the same problem, I will try to fix it though...

Dude. hope u can fix that, but that would be easy, end up "celicav" didn't post up or pm me any pics and said problem fixed

Just try to bend a little bit, its handcraft thing, so pls allow some deviation from factory

Cheers

[SlvrCelica09]

i would like black on black shift boot combo.. do you have the oem, or just the 3 inch smaller one?

[ChfNix]

Just try to bend a little bit, its handcraft thing, so pls allow some deviation from factory

Cheers

I got it, I'll have pics up soon, they look great!!!

[benzo]

are you still making these?


if so..
how much for short shifter, e break and center console arm rest in all black, shipped to 93727 fresno, ca ????

[vincent_doggy]

are you still making these?


if so..
how much for short shifter, e break and center console arm rest in all black, shipped to 93727 fresno, ca ????

USD$100 shipped

U want small collar/ring for the short boot?

[DaCCelica94]

how much for jus ebrake and armrest?

[benzo]

are you still making these?


if so..
how much for short shifter, e break and center console arm rest in all black, shipped to 93727 fresno, ca ????

USD$100 shipped

U want small collar/ring for the short boot?

cool. Imma start saving up for it.

and i have a 7gen short shifter not trd.. so what ever collar/ring will fit will be awesome!

[vincent_doggy]

are you still making these?


if so..
how much for short shifter, e break and center console arm rest in all black, shipped to 93727 fresno, ca ????

USD$100 shipped

U want small collar/ring for the short boot?

cool. Imma start saving up for it.

and i have a 7gen short shifter not trd.. so what ever collar/ring will fit will be awesome!

Depends what shift knob u use, if u still use the stocked 6th Gen knobs, then can sticked with stocked size collar/ring

If not, seems smaller collar look cooler

[DaCCelica94]

nvm jus saw its 70 for both the armrest and ebrake boot. what colors are still available?

[vincent_doggy]

nvm jus saw its 70 for both the armrest and ebrake boot. what colors are still available?

For the "leather" part, Black, red, white, grey...

Stitching u name it...

[DaCCelica94]

nvm jus saw its 70 for both the armrest and ebrake boot. what colors are still available?

For the "leather" part, Black, red, white, grey...

Stitching u name it...

okay cool. jus waitin on some money to come in then ill get right with you

[bloodMoney]

Here are a couple installed pics from over the weekend... Thanks Vince!

[trdproven]

anybody have pics of an ss-III shift knob, short shifter, black red stitched shift boot, ebrake, and armrest combination? I wanna see how it looks with all that red stitched combo, I wanna see if it gets that ss-III interior look.

[vincent_doggy]

anybody have pics of an ss-III shift knob, short shifter, black red stitched shift boot, ebrake, and armrest combination? I wanna see how it looks with all that red stitched combo, I wanna see if it gets that ss-III interior look.

Nobody, Nobody but U!!!
http://www.youtube.com/watch?v=qFjP-OJ7Bh4