 FS: two GT's parting out!, drum to disc, airbags, heads, more! |
  |
 Oct 30, 2009 - 12:44 PM
|
 
|
 Enthusiast  Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%)  |
that nipple he has on there is aftermarket... that is the feed line for oil to the turbo... stock it is a banjo bolt... i don't have any extra of the bolt... i can show you what it looks like if you please but they are hard to find... you're better off doing a custom fitting like the one in the picture... there is NO bung for that line
-------------------- Breaking Axles...
|
|
Oct 31, 2009 - 11:28 AM
|
|
|
Enthusiast Joined Oct 18, '06 From cincinnati Currently Offline Reputation: 10 (100%) |
fair enough, well let me know about the rest then and i'll figure that out later.
-------------------- proud =3sgte SWAPPED= '95 Celica ST owner [calling it the GT2 or half-trac]
309,000 miles n' .... |
|
Nov 7, 2009 - 5:00 PM
|
|
|
Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
BUMP!! guys still plenty of parts left... first page updated
-------------------- Breaking Axles...
|
|
Nov 7, 2009 - 5:02 PM
|
|
 Enthusiast Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) |
Reply to my message please. I sent money
QUOTE (pittfirefighter @ Nov 7, 2009 - 5:00 PM)  BUMP!! guys still plenty of parts left... first page updated -------------------- I've spilt my heart into this car :) And I don't ever plan to stop  - 6GC for Life - >Semper Fi< 1994 Cupra :p 3sgte 1995 Celica ST DD 1969 Chevelle SS alllll balls. P2 approved! |
|
Nov 7, 2009 - 9:28 PM
|
|
|
Enthusiast Joined Aug 28, '08 From Woolwich, Maine Currently Offline Reputation: 0 (0%) |
Are the motor mounts for the GT still available, if so how many miles were on the car they came out of?
|
|
Nov 7, 2009 - 9:40 PM
|
|
|
Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
101k.... no tears or stress marks on the mounts... i have two sets of mounts actually... these ones are the lower mileage ones
-------------------- Breaking Axles...
|
|
Nov 8, 2009 - 1:43 AM
|
|
 Enthusiast Joined Sep 23, '08 From Hawaii Currently Offline Reputation: 10 (100%) |
how much for the wiring harness that connects to the oem radio shipped to 96789?
This post has been edited by captb: Nov 8, 2009 - 1:44 AM |
|
Nov 8, 2009 - 8:37 AM
|
|
|
Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
which harness?? the amplifier harness? the actual dash harness?
-------------------- Breaking Axles...
|
|
Nov 8, 2009 - 3:48 PM
|
|
 Enthusiast Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) |
How much for the tinted gas cap? Pm me
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
|
Nov 8, 2009 - 5:21 PM
|
|
|
Enthusiast Joined Sep 23, '08 From Hawaii Currently Offline Reputation: 10 (100%) |
QUOTE (pittfirefighter @ Nov 8, 2009 - 9:37 AM) which harness?? the amplifier harness? the actual dash harness? the radio connector that connects to this, toyota wiring harness. the PO decided to splice the wires when he got an aftermarket stereo rather than getting a harness. |
|
Nov 8, 2009 - 7:05 PM
|
|
 Enthusiast Joined Sep 29, '09 From Prince George, BC CANADA EH! Currently Offline Reputation: 8 (100%) |
are the headlights still there/intact? I'm in desperate need of both low beam units
-------------------- ST205 Crew represent
 Challenge Accepted |
|
Nov 8, 2009 - 7:55 PM
|
|
|
Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
QUOTE (pittfirefighter @ Oct 19, 2009 - 8:44 AM) NO FENDERS, NO BUMPERS, NO HEADLIGHTS - DO NOT EVEN ASK. i will think about the wiring harness... i would have to cut it off and that would leave that entire harness useless.... shouldnt be a problem though... that harness isn't needed (purchased) too often tinted gas cap?? This post has been edited by pittfirefighter: Nov 9, 2009 - 10:15 AM -------------------- Breaking Axles...
|
|
Nov 8, 2009 - 8:34 PM
|
|
 Enthusiast Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) |
could you send me pics of the drum to disc conversion to diegohigax@hotmail.com plz?
--------------------  |
|
Nov 8, 2009 - 8:43 PM
|
|
|
Enthusiast Joined Sep 23, '08 From Hawaii Currently Offline Reputation: 10 (100%) |
QUOTE (pittfirefighter @ Nov 8, 2009 - 7:55 PM) no headlights... i will think about the wiring harness... i would have to cut it off and that would leave that entire harness useless.... shouldnt be a problem though... that harness isn't needed (purchased) too often tinted gas cap?? aint a big deal if you dont want to part. i can install um either way. just figured id make my life a bit easier after the fourth hu swap. 
|
|
Nov 8, 2009 - 10:18 PM
|
|
|
Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
guys i don't have pics of the drum to disc swap.... all the parts are still on the GTs, everything is in good working condition, all calipers function properly, all rotors are in good condition, i will take pics of it when it gets pulled off the car... i am not pulling any of those parts though until someone shows some real interest... its a lot of parts and a lot of my time... they are all stock parts...
-------------------- Breaking Axles...
|
|
Nov 9, 2009 - 12:56 AM
|
|
|
Enthusiast Joined Aug 28, '08 From Woolwich, Maine Currently Offline Reputation: 0 (0%) |
QUOTE (pittfirefighter @ Nov 7, 2009 - 9:40 PM) 101k.... no tears or stress marks on the mounts... i have two sets of mounts actually... these ones are the lower mileage ones How much are you willing to let them go for? I'm just looking for a cheap set that I can make into urethane bushings. This post has been edited by barterj: Nov 9, 2009 - 1:02 AM |
|
Nov 9, 2009 - 6:32 AM
|
|
|
Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
QUOTE (barterj @ Nov 9, 2009 - 12:56 AM) QUOTE (pittfirefighter @ Nov 7, 2009 - 9:40 PM) 101k.... no tears or stress marks on the mounts... i have two sets of mounts actually... these ones are the lower mileage ones How much are you willing to let them go for? I'm just looking for a cheap set that I can make into urethane bushings. i have about 8 different people interested in them so i probably will not be selling them cheap at all... just buy the urethane inserts... they work great -------------------- Breaking Axles...
|
|
Nov 9, 2009 - 10:37 AM
|
|
|
Enthusiast Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) |
The tinted gas door and chrome gas cap on your black gt
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
|
Nov 9, 2009 - 10:41 AM
|
|
|
Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
QUOTE (96stgreendemon @ Nov 9, 2009 - 11:37 AM) The tinted gas door and chrome gas cap on your black gt i don't have either of those, never did -------------------- Breaking Axles...
|
|
Nov 10, 2009 - 10:10 AM
|
|
|
Enthusiast Joined Oct 1, '07 From Georgia Currently Offline Reputation: 5 (100%) |
PMd
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 12:22 AM |