Feeler Project on Clear Bumper Signal & 3rd Brake, 94-95 Preface, GT-4 , 3rd Brake Light for Hatch Options

[CelicaST_CALI]

Not enough that u have a trd bumper and beams,always wanting more... -_- jk jk

[JDUB]

1. Shannon - 94-95 turns
2. marco-polo - gt4 turns and 3rd brake
3. Darkchylde - 94-95 turns and 3rd brake
4. Black13n - gt4 turns and 3rd brake
5. project671 - 94-95 turns and maybe gt4 turns
6. b1gr3d - 94-95 turns
7. Cavegod - gt4 turns
8. Ekan -94-95 turns
9. Bigblock - 94-95 turns
10. gabyz - 3rd brake
11. MrAyasli - 3rd brake
12. Robby - gt4 turns and 3rd brake
13. Jaws4God - 94-95 turns
14. brento_bot - gt4 turns and 3rd brake
15. 3waystunna - gt4 turns
16. Rebel - 3rd brake
17. GriffGirl - 3rd brake
18. delusionz - gt4 turns and 3rd brake
19. pittfirefighter - 94-95 turns and 3rd brake
20. mgnt232 - 94-95 turns
21. JDUB-preface clear turns

[captb]

1. Shannon - 94-95 turns
2. marco-polo - gt4 turns and 3rd brake
3. Darkchylde - 94-95 turns and 3rd brake
4. Black13n - gt4 turns and 3rd brake
5. project671 - 94-95 turns and maybe gt4 turns
6. b1gr3d - 94-95 turns
7. Cavegod - gt4 turns
8. Ekan -94-95 turns
9. Bigblock - 94-95 turns
10. gabyz - 3rd brake
11. MrAyasli - 3rd brake
12. Robby - gt4 turns and 3rd brake
13. Jaws4God - 94-95 turns
14. brento_bot - gt4 turns and 3rd brake
15. 3waystunna - gt4 turns
16. Rebel - 3rd brake
17. GriffGirl - 3rd brake
18. delusionz - gt4 turns and 3rd brake
19. pittfirefighter - 94-95 turns and 3rd brake
20. mgnt232 - 94-95 turns
21. JDUB-preface clear turns
22. Captb - preface clear turns

[njccmd2002]

Not enough that u have a trd bumper and beams,always wanting more... -_- jk jk

MOAR, HAHAHA

im looking into all the RARE stuff.. Add that an aluminun strut bar from jspeed..

[Espo]

1. Shannon - 94-95 turns
2. marco-polo - gt4 turns and 3rd brake
3. Darkchylde - 94-95 turns and 3rd brake
4. Black13n - gt4 turns and 3rd brake
5. project671 - 94-95 turns and maybe gt4 turns
6. b1gr3d - 94-95 turns
7. Cavegod - gt4 turns
8. Ekan -94-95 turns
9. Bigblock - 94-95 turns
10. gabyz - 3rd brake
11. MrAyasli - 3rd brake
12. Robby - gt4 turns and 3rd brake
13. Jaws4God - 94-95 turns
14. brento_bot - gt4 turns and 3rd brake
15. 3waystunna - gt4 turns
16. Rebel - 3rd brake
17. GriffGirl - 3rd brake
18. delusionz - gt4 turns and 3rd brake
19. pittfirefighter - 94-95 turns and 3rd brake
20. mgnt232 - 94-95 turns
21. JDUB-preface clear turns
22. Captb - preface clear turns
23. Espo - 3rd brake light

[wolfie308]

[vincent_doggy]

This post has been edited by vincent_doggy: Mar 18, 2010 - 5:15 AM

[MrAyasli]

Any updates on these?

[HerosBlade]

1. Shannon - 94-95 turns
2. marco-polo - gt4 turns and 3rd brake
3. Darkchylde - 94-95 turns and 3rd brake
4. Black13n - gt4 turns and 3rd brake
5. project671 - 94-95 turns and maybe gt4 turns
6. b1gr3d - 94-95 turns
7. Cavegod - gt4 turns
8. Ekan -94-95 turns
9. Bigblock - 94-95 turns
10. gabyz - 3rd brake
11. MrAyasli - 3rd brake
12. Robby - gt4 turns and 3rd brake
13. Jaws4God - 94-95 turns
14. brento_bot - gt4 turns and 3rd brake
15. 3waystunna - gt4 turns
16. Rebel - 3rd brake
17. GriffGirl - 3rd brake
18. delusionz - gt4 turns and 3rd brake
19. pittfirefighter - 94-95 turns and 3rd brake
20. mgnt232 - 94-95 turns
21. JDUB-preface clear turns
22. Captb - preface clear turns
23. Espo - 3rd brake light
24. Herosblade 94-95 turns and 3rd brake

[block]

i may be interested in the gt4 turns and hatch light, if the prices aren't bizzare. ill sit and watch

[sincerelyseb]

id be down for a smoked third brake light

[Espo]

i may be interested in the gt4 turns and hatch light, if the prices aren't bizzare. ill sit and watch

+1 on the hatch light. If these are too far over the $55 USD mark, it's not worth it to me. Not to be rude, as I know you have little control over the prices.

[vincent_doggy]

i may be interested in the gt4 turns and hatch light, if the prices aren't bizzare. ill sit and watch

+1 on the hatch light. If these are too far over the $55 USD mark, it's not worth it to me. Not to be rude, as I know you have little control over the prices.

Are you talking to me or someone else?
I didn't name any PRICE yet and I didn't ask for any down payment.
Not to be polite, I don't mind sit and watch if some other fellows willing to do such in a BUDGET price.



This post has been edited by vincent_doggy: Mar 19, 2010 - 11:49 AM

[Espo]

i may be interested in the gt4 turns and hatch light, if the prices aren't bizzare. ill sit and watch

+1 on the hatch light. If these are too far over the $55 USD mark, it's not worth it to me. Not to be rude, as I know you have little control over the prices.

Are you talking to me or someone else?
I didn't name any PRICE yet and I didn't ask for any down payment.
Not to be polite, I don't mind sit and watch if some other fellows willing to do such in a BUDGET price.

No, I was saying that if these end up being priced too far over my mark, I may back out, but I would love to see this done.

I was also trying to let you know I wasn't trying to insult you, as I know your products are excellent (I have three of them, as you know )

Edit: Yes, it was aimed towards you Vince, I apologize if my quoting of someone else confused you.

This post has been edited by Espo: Mar 19, 2010 - 11:54 PM

[FORGMANN]

If you can get these made ,sell for a BUDGET price and still make a profit
then will great for you and 6GC community. I can only imagine will need
to make a set amount as i can't imagine small volume will offset cost of
having to make plates I must say when you have ideas you do what you
can to make them happen and big for that.

I think it is somewhat unfair to portray Wolfie as overcharging as it
is not his fault the dollar is very weak against the pound. I have all his
products for my st205 and simply amazing oem quaility. Back in
1992 i paid 300 and waited 3 months for jdm oem clear corners
for my CRX ..that was way before there was import scene !!

[delusionz]

what's the status on this?

[wolfie308]

If you can get these made ,sell for a BUDGET price and still make a profit
then will great for you and 6GC community. I can only imagine will need
to make a set amount as i can't imagine small volume will offset cost of
having to make plates I must say when you have ideas you do what you
can to make them happen and big for that.

I think it is somewhat unfair to portray Wolfie as overcharging as it
is not his fault the dollar is very weak against the pound. I have all his
products for my st205 and simply amazing oem quaility. Back in
1992 i paid 300 and waited 3 months for jdm oem clear corners
for my CRX ..that was way before there was import scene !!

Thanks for your support FORGMANN. I also can't see how volume would justify tooling costs, if they did, don't you think a Chinese factory would have produced them by now? In addition I'd point out that my prices have remained unchanged or even reduced slightly over the 5 years since I started with the GT4 fronts. This is despite that over this period my costs have increased significantly.

What sort of price are people hoping to pay for these? Even when I was giving away the brake lens FOC with the fronts before Xmas, my price was still too high for a lot of folks

It's very easy to put your name on a list - different thing stumping up the cash sometimes

[Badkarma]

1. Shannon - 94-95 turns
2. marco-polo - gt4 turns and 3rd brake
3. Darkchylde - 94-95 turns and 3rd brake
4. Black13n - gt4 turns and 3rd brake
5. project671 - 94-95 turns and maybe gt4 turns
6. b1gr3d - 94-95 turns
7. Cavegod - gt4 turns
8. Ekan -94-95 turns
9. Bigblock - 94-95 turns
10. gabyz - 3rd brake
11. MrAyasli - 3rd brake
12. Robby - gt4 turns and 3rd brake
13. Jaws4God - 94-95 turns
14. brento_bot - gt4 turns and 3rd brake
15. 3waystunna - gt4 turns
16. Rebel - 3rd brake
17. GriffGirl - 3rd brake
18. delusionz - gt4 turns and 3rd brake
19. pittfirefighter - 94-95 turns and 3rd brake
20. mgnt232 - 94-95 turns
21. JDUB-preface clear turns
22. Captb - preface clear turns
23. Espo - 3rd brake light
24. Herosblade 94-95 turns and 3rd brake
25. Badkarma GT Four turnsignals, 3rd brake

[delusionz]

Yeah as much as I love my GT-Four, I can't justify a couple hundred dollars (probably closer to 400 for the set) for a couple pieces of plastic. Surely just 5 of us paying that much would buy you your own injection mould machine? From thereon in the rest of us are just paying for a few goops of epoxy.

Sorry if there's something I've missed here, since I'm no expert on plastic craft.

[DwarvenFood]

1. Shannon - 94-95 turns
2. marco-polo - gt4 turns and 3rd brake
3. Darkchylde - 94-95 turns and 3rd brake
4. Black13n - gt4 turns and 3rd brake
5. project671 - 94-95 turns and maybe gt4 turns
6. b1gr3d - 94-95 turns
7. Cavegod - gt4 turns
8. Ekan -94-95 turns
9. Bigblock - 94-95 turns
10. gabyz - 3rd brake
11. MrAyasli - 3rd brake
12. Robby - gt4 turns and 3rd brake
13. Jaws4God - 94-95 turns
14. brento_bot - gt4 turns and 3rd brake
15. 3waystunna - gt4 turns
16. Rebel - 3rd brake
17. GriffGirl - 3rd brake
18. delusionz - gt4 turns and 3rd brake
19. pittfirefighter - 94-95 turns and 3rd brake
20. mgnt232 - 94-95 turns
21. JDUB-preface clear turns
22. Captb - preface clear turns
23. Espo - 3rd brake light
24. Herosblade - 94-95 turns and 3rd brake
25. Badkarma - GT Four turnsignals, 3rd brake
26. DwarvenFood - 94-95 clear turns