Short shifter for GT4, Is TRD compatible? Options

[Goonter]

M friend bought a GT-FOUR from japan. It's in vancouver right now and he found a TRD short shifter.Now he asked me if it will fit. I said probably but i didnt wanna give him a 100% "im sure it will" cause iif by any chance it doesn't then it's all on me -_-. I know it's a pretty stupid question but WILL it fit the GT-FOUR. i'm just not sure cause it's right hand drive and since it's JDM im not sure if the shifter assembly is the same

[Tom_SS2]

check its part number http://www.trdparts.jp/english/parts_quickshift.html

CELICA ST20# All year 33530-ST000

[Goonter]

the quickshifter is the one for 00-01 models. 7th gen

[Tom_SS2]

the quickshifter is the one for 00-01 models. 7th gen

Gen 7 shifters apparently do fit as a couple CCUK members have done it but it is very wobbly due to the size difference on the ends it is not worth doing with an expensive Gen 7 TRD short shifter especially as the only way to fit it will probably be to remove the shift stick from the rest of the unit and fit it into your original Gen 6 unit. Better to get the proper Gen 6 TRD version, a cheaper alternative or create your own http://www.6gc.net/howto/make_custom_short_shifter

This post has been edited by Tom_SS2: May 30, 2010 - 6:35 AM

[Goonter]

ahhh.. ok thanks for the great info man . i'll tell him about hat custom one instead

[azian_advanced]

check its part number http://www.trdparts.jp/english/parts_quickshift.html

CELICA ST20# All year 33530-ST000

here's one for sale on ebay

eBay: JDM-Toyota-TRD-Short-Shifter-Set-Celica-Exiv-ST202-205-

comes with a TOM's shift knob to match the front lip

This post has been edited by azian_advanced: May 31, 2010 - 5:51 PM

[Smaay]

actually the stock 7th gen shifters are an upgrade over the stock 6th gen

[Tom_SS2]

actually the stock 7th gen shifters are an upgrade over the stock 6th gen

due to the fitment differences the gear change isn't as accurate so really its not an upgrade as is it has cons as well as pros,